Reverb switch location...

May 21st, 2004, 08:45 PM

I've got a 65 Olds 98 and I picked up an AM/FM radio with the rear seat reverb setup. The service manual doesnt give a good picture about how and where the switch is mounted. I know from the person who removed the radio, that it is located center dash below the HVAC controls. But my dash doesnt seem to have a mounting place for it.
Can anyone out there tell me anything about how the switch is actually mounted? Is there a hole that is drilled into the dash? (Really hope not!)
Any help or pictures would be great

Oldsguy · May 28th, 2004, 09:31 AM

My son owns a '64 98 with that option. The switch in his car is near the center of the dash, below the overhang. As I recall, it is actually on a horizontal surface FACIND DOWN but I will have to double check on that. His car is stored at my place right now

jdorour · May 31st, 2004, 09:57 PM

The 65 and 66 are the same...
If the reverb was factory installed the switch was in the bottom side of the dash pad.
If the reverb was dealer installed it was in the bottom of the dash just to the right of the drivers side ash tray.

May 28th, 2004, 09:31 AM	#2 (permalink)
Oldsguy Hot Rodder at heart Administrator Join Date: May 2004 Location: Garland Texas Posts: 8,521	My son owns a '64 98 with that option. The switch in his car is near the center of the dash, below the overhang. As I recall, it is actually on a horizontal surface FACIND DOWN but I will have to double check on that. His car is stored at my place right now __________________ Dan "The rocket 455.....it's a sledgehammer approach to a thumbtack world" LuxBlue of HAMB.

May 31st, 2004, 09:57 PM	#3 (permalink)
jdorour Senior Member Join Date: Feb 2004 Location: Atlanta, GA. Posts: 122	The 65 and 66 are the same... If the reverb was factory installed the switch was in the bottom side of the dash pad. If the reverb was dealer installed it was in the bottom of the dash just to the right of the drivers side ash tray. __________________ 1966 Ninety Eight Convertible - 425 Tri-Carb, Factory Dual Exh, Switch-Pitch THM400, 3.54 Posi. 1966 Catalina Wagon - 421 Tri-Power, M21, 4.11 Saf-T-Trac, 8 Bolt Wheels 1989 IROC-Z - 5.7TPI

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1966 Cutlass 4 speed "barn find"!	Mr. King	Cutlass	12	February 12th, 2007 08:51 AM
Speedo Cable	VegasDelta	Parts Wanted	2	October 12th, 2006 04:48 PM
New member	57teebyrd	Cutlass	2	August 16th, 2006 05:14 AM
still trying to decode my cutlass	twistedcutlass	Cutlass	3	August 11th, 2006 06:27 AM

May 21st, 2004, 08:45 PM	#1 (permalink)
<Ghostdiver> Guest Posts: n/a	I've got a 65 Olds 98 and I picked up an AM/FM radio with the rear seat reverb setup. The service manual doesnt give a good picture about how and where the switch is mounted. I know from the person who removed the radio, that it is located center dash below the HVAC controls. But my dash doesnt seem to have a mounting place for it. Can anyone out there tell me anything about how the switch is actually mounted? Is there a hole that is drilled into the dash? (Really hope not!) Any help or pictures would be great