1/4 window regulator rollers

dyscookn · February 15th, 2007, 08:06 PM

1975 Delta 88 Conv. 1/4 window rollers are shot.Have looked on Ebay,Googled and Yahooed.These are the lower roller that are riveted on.Tried Florida and North. fasteners but they seem to be discontinued or only have Cutless stuff. Any help on locatinig the proper rollers?

2blu442 · February 15th, 2007, 08:11 PM

If they're rivited on, you may need to replace the regulator. Are these on the regulators? Are they power or hand crank windows? Can you provide a photograph?

dyscookn · February 15th, 2007, 08:37 PM

Hand crank. They look like a yo-yo and slide up and down on the groove in the mddle. They are made of nylon or some kind of pastic that has just fallen apart over the years.

pinky · September 26th, 2007, 03:09 PM

Hi,
I have the same problem as you and I am looking for a regulator as well or a way to replace these nylons yo-yos as well.
how did you fix yours ?
mine is on a 73 olds but exact same issue.
thanks

joe_padavano · September 26th, 2007, 04:19 PM

Quote:

Originally Posted by dyscookn

1975 Delta 88 Conv. 1/4 window rollers are shot.Have looked on Ebay,Googled and Yahooed.These are the lower roller that are riveted on.Tried Florida and North. fasteners but they seem to be discontinued or only have Cutless stuff. Any help on locatinig the proper rollers?

Any of these work?

https://www.dormanproducts.com/cgi-b...65828&item_no=

72rocket · October 4th, 2007, 09:34 PM

I've heard of people using shower door rollers for this purpose. I don't remember where I read it (camaro or chevelle forum of some type I think) but figured it might be worth a try since Home Depot and Lowe's are all over the country. From what I remember it worked pretty well. I'll post back if I can find it.

pinky · October 8th, 2007, 01:29 PM

but that is pretty close and is also something I might need
https://www.dormanproducts.com/cgi-b...tegory_list=:0

dyscookn · October 8th, 2007, 02:16 PM

Hi all!I thought this might be so old that no one would still read it.I have not fixed the 1/4 window rollers as I am trying to sell the car and don't want to spend the $.
I did find this source that you can look over and I will try and look up the pt.# when I get home.
http://northlandfasteners.biz/Store/...2b0a382d3583d0

By the way the D88 vert. is still for sale as we have have moved due to loss of wifes job.

pinky · October 8th, 2007, 02:16 PM

at
http://www.hydroe.com/PP_Quarter_Win...__EA_7801.html

pinky · October 8th, 2007, 02:18 PM

on the http://northlandfasteners.biz/Store/...2b0a382d3583d0
thanks for the help
JCharles

dyscookn · October 8th, 2007, 02:27 PM

Thats it!! I new I had seen these things for ~ $70. but couldn't remember where.
C.R.S. is a terrible thing!!! If you don't know what that is ,, you're not old enough yet.

pinky · October 8th, 2007, 02:35 PM

http://northlandfasteners.biz/Store/...oducts_id=1906
can anyone confirm if they are the same product ?

dyscookn · October 8th, 2007, 07:48 PM

Got home - looked up the part number. Looks like it is 10-747.

pinky · October 8th, 2007, 08:01 PM

their site especially http://northlandfasteners.biz/Store/...oducts_id=1906
do you have the photo and dimentions by any chance ?

59-59-59 · October 16th, 2007, 10:40 PM

Laugh all you want, but rollers for sliding screen doors were almost identical for an old '59 Olds I had with manual windows..It was only minor modifications that were made and was under 3 bucks for a set of windows.. I picked them up at the Home Depot. Maybe this can work for your application.

sturdi · February 1st, 2008, 06:09 AM

I have a 75 delta 88 convertible and my rear window do not roll up straight. What am I to do next. I have been researching but now answers. Please help.

Mark

71rocket · February 6th, 2008, 06:44 AM

Quote:

Originally Posted by sturdi

I have a 75 delta 88 convertible and my rear window do not roll up straight. What am I to do next. I have been researching but now answers. Please help.

Mark

Remove the window handle and the interior quarter panel, may have to pull the rear seats to do that(I'm not familiar with your car). Then start looking.

February 15th, 2007, 08:06 PM	#1 (permalink)
dyscookn Registered User Join Date: Feb 2007 Posts: 59	1/4 window regulator rollers 1975 Delta 88 Conv. 1/4 window rollers are shot.Have looked on Ebay,Googled and Yahooed.These are the lower roller that are riveted on.Tried Florida and North. fasteners but they seem to be discontinued or only have Cutless stuff. Any help on locatinig the proper rollers?

February 15th, 2007, 08:11 PM	#2 (permalink)
2blu442 Moderator Join Date: Sep 2006 Location: Medford, Oregon Posts: 2,209	If they're rivited on, you may need to replace the regulator. Are these on the regulators? Are they power or hand crank windows? Can you provide a photograph? __________________ 1964 Cutlass Factory 4spd 1965 442 4spd 1967 442 Auto 1967 Cutlass Convertible 1967 Cutlass four door daily driver 1968 442 Auto 1969 442 W30 Auto 1970 442 4spd 1971 Cutlass Flat Top Wagon 1973 Che*vy 3/4 Ton 454/TH400 Tow Vehicle Only the tow vehicle is finished!

September 26th, 2007, 03:09 PM	#4 (permalink)
pinky Junior Member Join Date: Sep 2007 Posts: 27	I am looking too Hi, I have the same problem as you and I am looking for a regulator as well or a way to replace these nylons yo-yos as well. how did you fix yours ? mine is on a 73 olds but exact same issue. thanks

October 4th, 2007, 09:34 PM	#6 (permalink)
72rocket Junior Member Join Date: Jul 2007 Location: Vandenberg AFB, CA Posts: 18	I've heard of people using shower door rollers for this purpose. I don't remember where I read it (camaro or chevelle forum of some type I think) but figured it might be worth a try since Home Depot and Lowe's are all over the country. From what I remember it worked pretty well. I'll post back if I can find it. __________________ 1972 Cutlass Supreme 2000 Ford Lightning (12.72, 1/4 mile)

October 8th, 2007, 01:29 PM	#7 (permalink)
pinky Junior Member Join Date: Sep 2007 Posts: 27	nop that's not it but that is pretty close and is also something I might need https://www.dormanproducts.com/cgi-b...tegory_list=:0

February 15th, 2007, 08:37 PM	#3 (permalink)
dyscookn Registered User Join Date: Feb 2007 Posts: 59	Hand crank. They look like a yo-yo and slide up and down on the groove in the mddle. They are made of nylon or some kind of pastic that has just fallen apart over the years.

October 8th, 2007, 02:16 PM	#8 (permalink)
dyscookn Registered User Join Date: Feb 2007 Posts: 59	Hi all!I thought this might be so old that no one would still read it.I have not fixed the 1/4 window rollers as I am trying to sell the car and don't want to spend the $. I did find this source that you can look over and I will try and look up the pt.# when I get home. http://northlandfasteners.biz/Store/...2b0a382d3583d0 By the way the D88 vert. is still for sale as we have have moved due to loss of wifes job. Last edited by dyscookn; October 8th, 2007 at 02:18 PM..

October 8th, 2007, 02:16 PM	#9 (permalink)
pinky Junior Member Join Date: Sep 2007 Posts: 27	and here are the rollers at http://www.hydroe.com/PP_Quarter_Win...__EA_7801.html

October 8th, 2007, 02:18 PM	#10 (permalink)
pinky Junior Member Join Date: Sep 2007 Posts: 27	I am still interested by your part number as this seams cheaper on the http://northlandfasteners.biz/Store/...2b0a382d3583d0 thanks for the help JCharles

October 8th, 2007, 02:27 PM	#11 (permalink)
dyscookn Registered User Join Date: Feb 2007 Posts: 59	Thats it!! I new I had seen these things for ~ $70. but couldn't remember where. C.R.S. is a terrible thing!!! If you don't know what that is ,, you're not old enough yet.

October 8th, 2007, 02:35 PM	#12 (permalink)
pinky Junior Member Join Date: Sep 2007 Posts: 27	I am hopping these would work as well http://northlandfasteners.biz/Store/...oducts_id=1906 can anyone confirm if they are the same product ?

October 8th, 2007, 07:48 PM	#13 (permalink)
dyscookn Registered User Join Date: Feb 2007 Posts: 59	Got home - looked up the part number. Looks like it is 10-747.

October 8th, 2007, 08:01 PM	#14 (permalink)
pinky Junior Member Join Date: Sep 2007 Posts: 27	ok but does that match the part on the 2 websites ? their site especially http://northlandfasteners.biz/Store/...oducts_id=1906 do you have the photo and dimentions by any chance ?

October 16th, 2007, 10:40 PM	#15 (permalink)
59-59-59 Registered User Join Date: Sep 2006 Posts: 296	Laugh all you want, but rollers for sliding screen doors were almost identical for an old '59 Olds I had with manual windows..It was only minor modifications that were made and was under 3 bucks for a set of windows.. I picked them up at the Home Depot. Maybe this can work for your application.

February 1st, 2008, 06:09 AM	#16 (permalink)
sturdi Junior Member Join Date: Jan 2008 Posts: 5	1975 delta 88 I have a 75 delta 88 convertible and my rear window do not roll up straight. What am I to do next. I have been researching but now answers. Please help. Mark

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode