64 post rear qtrs.

therobski · October 22nd, 2009, 04:30 PM

Is the rear quarter panel the same between 64 -65 Cutlass 2 doors? I want to try and replace the rust section as seen in the picture on both sides just past the rear wheel. Is there any aftermarket part for this ( probably dreaming) and just maybe is there a sibling-Skylark-Lemans-Chevelle that may work?

442scotty · October 22nd, 2009, 07:54 PM

No aftermarket stuff and there probably never will be...I had rust in the same location.. I had a beat up front fender and I cut out a patch panel using the flare from the fender. It took a while because I had never done something like this before but the flare from the fender matched up the to quarter flare and it worked great...

Im pretty sure 64 and 65 1/4s were the same for patch purposes...

therobski · October 23rd, 2009, 06:59 AM

Thats a good idea I have an extra left front fender.

442scotty · October 23rd, 2009, 05:06 PM

Just be real patient and it should work great...took me several hours to make a graft..lots of trial fittings.

October 22nd, 2009, 04:30 PM	#1 (permalink)
therobski Registered User Join Date: Jul 2009 Posts: 41	64 post rear qtrs. Is the rear quarter panel the same between 64 -65 Cutlass 2 doors? I want to try and replace the rust section as seen in the picture on both sides just past the rear wheel. Is there any aftermarket part for this ( probably dreaming) and just maybe is there a sibling-Skylark-Lemans-Chevelle that may work?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
68-69 Post (Sports Coupe) rear window channel	68Tom	Parts Wanted	0	October 19th, 2009 12:26 PM
First post....	snowri	Eighty-Eight	3	April 5th, 2009 11:40 AM
1965 Cutlass/442 Right Rear Quarter Panel, Post Car	2blu442	Parts For Sale	3	February 26th, 2009 02:01 PM
Rear Qtrs 56 Ninety Eight	56oldsnub	Parts Wanted	0	January 22nd, 2009 10:12 PM

October 22nd, 2009, 07:54 PM	#2 (permalink)
442scotty Registered User Join Date: May 2008 Location: Calgary Alberta Posts: 228	No aftermarket stuff and there probably never will be...I had rust in the same location.. I had a beat up front fender and I cut out a patch panel using the flare from the fender. It took a while because I had never done something like this before but the flare from the fender matched up the to quarter flare and it worked great... Im pretty sure 64 and 65 1/4s were the same for patch purposes...

October 23rd, 2009, 06:59 AM	#3 (permalink)
therobski Registered User Join Date: Jul 2009 Posts: 41	Thats a good idea I have an extra left front fender.

October 23rd, 2009, 05:06 PM	#4 (permalink)
442scotty Registered User Join Date: May 2008 Location: Calgary Alberta Posts: 228	Just be real patient and it should work great...took me several hours to make a graft..lots of trial fittings.