Wiper arm linkage

ztim · November 24th, 2006, 08:46 PM

My right wiper gets tangled up with my left. I think the arm might be bent. What can I do? Can I just buy the one arm or would I have to find a whole set up.

How can I remove the arm itself until I can find a new one?
Thanks

American Lead · December 16th, 2006, 05:36 PM

what year is your car? on my 55, i could just pull them off, i am pretty sure you can buy new arms anywhere, any car parts store should have them, i know in canada, canadian tire has them, thats where i bought mine

ztim · December 22nd, 2006, 01:33 PM

I did get the arm off and it seems the splines are worn as if they were used when still frozen to the car or under heavy (snow) load. I look around on the net but can't seem to find any. I'll try a parts store...other than NAPA.

2blu442 · December 22nd, 2006, 03:54 PM

If you strike out on a new one let us know what year your car is. Someone is bound to have a parts car or extras in their garage.

ztim · December 22nd, 2006, 04:06 PM

Okay. Thanks. It is for a 1984 Delta 88 Royale four door.

Redog · December 22nd, 2006, 11:14 PM

Try eBay or a junk yard that has older cars. Something like that you can get off any full size GM from the same years.

How did you bend it? I have an 85 Delta and would like to avoid this if I can

ztim · December 22nd, 2006, 11:24 PM

I didn't bend it. I think the splines wore down on the famale section that goes over the male section from the wiper arm. That in turn fouls up with the left wiper.

I'll try a junk yard, but the last time I tried the ones around here they didn't seem to happy about searching for such a dinky item.

Redog · December 23rd, 2006, 01:35 AM

Do you have a "U-Pull-It" around you?

ztim · December 23rd, 2006, 05:53 AM

I am sure I don't. I don't know what that is. I am just beginning to learn about cars.

November 24th, 2006, 08:46 PM	#1 (permalink)
ztim Registered User Join Date: Sep 2006 Location: SC Posts: 275	Wiper arm linkage My right wiper gets tangled up with my left. I think the arm might be bent. What can I do? Can I just buy the one arm or would I have to find a whole set up. How can I remove the arm itself until I can find a new one? Thanks

December 22nd, 2006, 03:54 PM	#4 (permalink)
2blu442 Moderator Join Date: Sep 2006 Location: Medford, Oregon Posts: 2,256	If you strike out on a new one let us know what year your car is. Someone is bound to have a parts car or extras in their garage. __________________ 1964 Cutlass Factory 4spd 1965 442 4spd 1967 442 Auto 1967 Cutlass Convertible 1967 Cutlass four door daily driver 1968 442 Auto 1969 442 W30 Auto 1970 442 4spd 1971 Cutlass Flat Top Wagon 1973 Che*vy 3/4 Ton 454/TH400 Tow Vehicle Only the tow vehicle is finished!

December 22nd, 2006, 11:14 PM	#6 (permalink)
Redog Alero Chapter Secretary Join Date: Aug 2006 Location: Newtown, PA Posts: 1,145	Try eBay or a junk yard that has older cars. Something like that you can get off any full size GM from the same years. How did you bend it? I have an 85 Delta and would like to avoid this if I can __________________ Me 2000 Alero running 14's 2005 Nissan Altima (her's) 1967 Olds 330 motor sitting on a stand 1985 Delta 88 w/1968 350 rocket ( MURDERED )

December 23rd, 2006, 01:35 AM	#8 (permalink)
Redog Alero Chapter Secretary Join Date: Aug 2006 Location: Newtown, PA Posts: 1,145	Do you have a "U-Pull-It" around you? __________________ Me 2000 Alero running 14's 2005 Nissan Altima (her's) 1967 Olds 330 motor sitting on a stand 1985 Delta 88 w/1968 350 rocket ( MURDERED )

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

December 16th, 2006, 05:36 PM	#2 (permalink)
American Lead 2Blue 55 Join Date: Dec 2006 Location: Nova Scotia, Canada Posts: 455	what year is your car? on my 55, i could just pull them off, i am pretty sure you can buy new arms anywhere, any car parts store should have them, i know in canada, canadian tire has them, thats where i bought mine

December 22nd, 2006, 01:33 PM	#3 (permalink)
ztim Registered User Join Date: Sep 2006 Location: SC Posts: 275	I did get the arm off and it seems the splines are worn as if they were used when still frozen to the car or under heavy (snow) load. I look around on the net but can't seem to find any. I'll try a parts store...other than NAPA.

December 22nd, 2006, 04:06 PM	#5 (permalink)
ztim Registered User Join Date: Sep 2006 Location: SC Posts: 275	Okay. Thanks. It is for a 1984 Delta 88 Royale four door.

December 22nd, 2006, 11:24 PM	#7 (permalink)
ztim Registered User Join Date: Sep 2006 Location: SC Posts: 275	I didn't bend it. I think the splines wore down on the famale section that goes over the male section from the wiper arm. That in turn fouls up with the left wiper. I'll try a junk yard, but the last time I tried the ones around here they didn't seem to happy about searching for such a dinky item.

December 23rd, 2006, 05:53 AM	#9 (permalink)
ztim Registered User Join Date: Sep 2006 Location: SC Posts: 275	I am sure I don't. I don't know what that is. I am just beginning to learn about cars.