axle bearing retainer

Bunser · 03-30-2008, 06:09 AM

I was wondering where I could find axle bearing kits, for a 70 Cutlass with a 12 bolt rear end? I can probably get the bearings by cross referencing the nos. and I think I can get the seals, but I don't know where to get the "retainer." Anybody know?

Run to Rund · 03-30-2008, 07:37 AM

What retainer? Instead of a bearing and retainer being pressed onto the axle shaft, the c-clip type axles have the bearing and a seal pressed into the housing, and the shaft rides directly on the bearing.

Bunser · 03-30-2008, 10:22 AM

Hmm, seems I had the same conversation with the guy behind the parts counter.There is NO clip.You are perhaps thinking of a Chevy or Ford rearend.The original retainer is a pressed metal affair, removed by careful use of a chisel.You then replace it with a solid metal "retainer." If anyone knows where I can get one, please post.

Dapapadon · 03-30-2008, 04:09 PM

Are you talking about the metal collar that goes on the axel shaft after the bearing? If so, the last several sets of bearings I've bought had the collar/retainer included with the bearing.

Don

monzaz · 04-18-2008, 09:21 AM

Bunser, I have this same problem and i build diffs...lol. You can not buy them seperately. you ahve to buy the whole bearing set to get that collar. Well at least I have not found anyone yet that sells them. SO if you find a supplier please let me know...lol.

That is your answer...you have to buy the whole SetA9 bearing or RW507CR sealed bearing. crummy huh.

Good luck , Jim

jdrace.com

Bunser · 04-21-2008, 03:12 AM

I was able to get bearings,collar and seals from Supercars Unlimited. (www.supercarsunlimited.com) ORDERS (only) 1-888-OLDS442
Phone (503) 641-1442
They seem to know their stuff! Would recommend them.
ps
Bearings and collar came as a set...wouldn't sell separately.

03-30-2008, 06:09 AM	#1 (permalink)
Bunser Junior Member Join Date: Feb 2008 Posts: 15	axle bearing retainer I was wondering where I could find axle bearing kits, for a 70 Cutlass with a 12 bolt rear end? I can probably get the bearings by cross referencing the nos. and I think I can get the seals, but I don't know where to get the "retainer." Anybody know?

04-18-2008, 09:21 AM	#5 (permalink)
monzaz Senior Member Join Date: Jul 2006 Location: Richfield, Oh Posts: 100	axle bearing retaining collar Bunser, I have this same problem and i build diffs...lol. You can not buy them seperately. you ahve to buy the whole bearing set to get that collar. Well at least I have not found anyone yet that sells them. SO if you find a supplier please let me know...lol. That is your answer...you have to buy the whole SetA9 bearing or RW507CR sealed bearing. crummy huh. Good luck , Jim jdrace.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
rear axle website	<powers455>	Drivetrain/Differentials	1	09-13-2007 09:11 PM
posi axle	mp71conv	Parts Wanted	3	09-11-2007 06:55 PM
57 Center Bearing Housing Broke - HELP!	J'ville	Drivetrain/Differentials	4	09-04-2007 09:50 AM
Water pump bearing stress	DonFrost	Small Blocks	8	03-10-2007 01:32 PM
Rear Axle Id	JOHNNY	Cutlass	0	08-06-2006 07:21 PM

03-30-2008, 07:37 AM	#2 (permalink)
Run to Rund Senior Member Join Date: Mar 2008 Posts: 136	What retainer? Instead of a bearing and retainer being pressed onto the axle shaft, the c-clip type axles have the bearing and a seal pressed into the housing, and the shaft rides directly on the bearing.

03-30-2008, 10:22 AM	#3 (permalink)
Bunser Junior Member Join Date: Feb 2008 Posts: 15	Hmm, seems I had the same conversation with the guy behind the parts counter.There is NO clip.You are perhaps thinking of a Chevy or Ford rearend.The original retainer is a pressed metal affair, removed by careful use of a chisel.You then replace it with a solid metal "retainer." If anyone knows where I can get one, please post.

03-30-2008, 04:09 PM	#4 (permalink)
Dapapadon Senior Member Join Date: Jan 2007 Location: Portland, OR Posts: 311	Are you talking about the metal collar that goes on the axel shaft after the bearing? If so, the last several sets of bearings I've bought had the collar/retainer included with the bearing. Don

04-21-2008, 03:12 AM	#6 (permalink)
Bunser Junior Member Join Date: Feb 2008 Posts: 15	I was able to get bearings,collar and seals from Supercars Unlimited. (www.supercarsunlimited.com) ORDERS (only) 1-888-OLDS442 Phone (503) 641-1442 They seem to know their stuff! Would recommend them. ps Bearings and collar came as a set...wouldn't sell separately.