Posi rear end questions

sworthy555 · October 24th, 2009, 04:47 AM

http://sanantonio.craigslist.org/pts/1435222895.html

I have a 70 SX non posi and was wondering if this posi would work with my SX? What should I look for?

Thanks,
Shawn

don71 · October 24th, 2009, 05:48 AM

Yes, thats what you are looking for. That could be a nice find. Price seems fair but was it put back together correctly? Bearing crush/depth is pretty important.

If you don't know much about these, do you have a friend that can go with you? You just want to look it over good. No bent or scored up axles with spun bearings. Be sure and get the backing plates, and any brake parts/hardware and the drums too.

I would allways hagle on the price, thats a given. The more complete it is, the better the deal.

svnt442 · October 24th, 2009, 11:59 AM

If you are looking for "originality" then no. You would want an "O" axle. This will bolt in though. You MAY need to change the length of your driveshaft though.

October 24th, 2009, 04:47 AM	#1 (permalink)
sworthy555 Registered User Join Date: Nov 2008 Location: South Texas Posts: 32	Posi rear end questions http://sanantonio.craigslist.org/pts/1435222895.html I have a 70 SX non posi and was wondering if this posi would work with my SX? What should I look for? Thanks, Shawn

October 24th, 2009, 05:48 AM	#2 (permalink)
don71 feed the pig Join Date: Jun 2007 Location: Central Missouri Posts: 226	Yes, thats what you are looking for. That could be a nice find. Price seems fair but was it put back together correctly? Bearing crush/depth is pretty important. If you don't know much about these, do you have a friend that can go with you? You just want to look it over good. No bent or scored up axles with spun bearings. Be sure and get the backing plates, and any brake parts/hardware and the drums too. I would allways hagle on the price, thats a given. The more complete it is, the better the deal. __________________ 1971 Cutlass S Holiday coupe-455/th400 3.23 Oldsmobile they were meant to be driven.

October 24th, 2009, 11:59 AM	#3 (permalink)
svnt442 Registered User Join Date: Jun 2009 Location: San Jose, CA Posts: 453	If you are looking for "originality" then no. You would want an "O" axle. This will bolt in though. You MAY need to change the length of your driveshaft though. __________________ Randy 1970 442

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1964 1965 1966 10 bolt posi 3.73 rear end complete rebuild	monzaz	Parts For Sale	0	October 3rd, 2009 01:57 PM
posi 10 bolt rear end with 4.10 richmond gear set	jensenracing77	Parts For Sale	1	September 3rd, 2009 05:03 PM
10 bolt 8.2 2.93 posi rear end	monzaz	Parts For Sale	0	January 22nd, 2009 05:02 PM
1970 olds 98 455 rear end posi	troy1	Ninety-Eight	4	February 12th, 2008 02:49 PM
70 442 posi rear end 4 sale	johnnybondo	Parts For Sale	0	February 11th, 2008 01:04 PM