my front spring are broken

mutzi · August 20th, 2009, 09:14 AM

hello,
on my car are my front spring is broken.
i have a 1978 oldsmobile delta 88 royal hardtop coupe with 6.6 cui gas engine VIN K with aircondition.

know somebody where i can order lowering front springs for my car (maybe 1", 1.5" or 2" lower the carfront)?

or fit chevy caprice springs on my car and which?

i hope somewhere can help me.

thaks and regards from germany
mutzi

72 cutlass455 · August 20th, 2009, 10:26 AM

http://www.espo.com/ See if these folks can help. Call them on the phone if you can they are slow at responding to e-mails.

joe_padavano · August 20th, 2009, 11:19 AM

Quote:

Originally Posted by mutzi

i hope somewhere can help me.

1977-1990 Caprice is the same and the springs should fit just fine.

The Stickman · August 20th, 2009, 11:46 AM

I have used Eibachs and they lower the car about an inch or so. I wanted more so I cut a coil and a half out of my F41 springs and used G-Body rear springs. Smae should work for you as they are both B-Bodies.

mutzi · August 21st, 2009, 02:00 AM

how about with the springs from chevy caprice 1991 - 1996?

thank you for your experiens

regards from germany

mutzi · August 21st, 2009, 02:13 AM

Quote:

Originally Posted by joe_padavano

1977-1990 Caprice is the same and the springs should fit just fine.

how about with the springs from chevy caprice 1991 - 1996?

thank you for your experiens

regards from germany

joe_padavano · August 21st, 2009, 07:34 AM

Quote:

Originally Posted by mutzi

how about with the springs from chevy caprice 1991 - 1996?

thank you for your experiens

regards from germany

Sorry, I should have included those in my prior post. The frame and suspension is pretty much the same on the B-body cars from 1977 through 1996.

mutzi · August 21st, 2009, 12:38 PM

Quote:

Originally Posted by 72 cutlass455

http://www.espo.com/ See if these folks can help. Call them on the phone if you can they are slow at responding to e-mails.

thanks for your Recommandation.

i buy a set of 1.5" front spring from this guys -> http://www.espo.com/.

i pay $95 thats a good price. the shipping rate make the order much higher. but is a cheap shippingrate to germany for $125 - on ebay or in the web many salers get a rate from $140 to $540.

have a good day

August 20th, 2009, 09:14 AM	#1 (permalink)
mutzi Registered User Join Date: Nov 2008 Posts: 37	my front spring are broken hello, on my car are my front spring is broken. i have a 1978 oldsmobile delta 88 royal hardtop coupe with 6.6 cui gas engine VIN K with aircondition. know somebody where i can order lowering front springs for my car (maybe 1", 1.5" or 2" lower the carfront)? or fit chevy caprice springs on my car and which? i hope somewhere can help me. thaks and regards from germany mutzi

August 20th, 2009, 11:46 AM	#4 (permalink)
The Stickman Registered User Join Date: Nov 2008 Location: Lehigh Valley Pa Posts: 313	I have used Eibachs and they lower the car about an inch or so. I wanted more so I cut a coil and a half out of my F41 springs and used G-Body rear springs. Smae should work for you as they are both B-Bodies. __________________ 1979 Olds Cutlass Cruiser ChopTop delivery 1984 IMSA Super Duty powered Fiero 1984 Olds Rocket 88 Custom(BattleCruiser)Cruiser 1996 Subaru wagon 2000 Totalled Dodge Caravan.

August 21st, 2009, 02:00 AM	#5 (permalink)
mutzi Registered User Join Date: Nov 2008 Posts: 37	thanks guys. how about with the springs from chevy caprice 1991 - 1996? thank you for your experiens regards from germany Last edited by mutzi; August 21st, 2009 at 02:03 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1973-77?? Dual Gate shifter...Broken	Eightupman	Parts For Sale	0	August 12th, 2009 08:32 PM
Bolt broken into manifold	veltboy618	Cutlass	16	March 30th, 2009 06:52 AM
Coil spring vs. leaf spring suspension	Longhorncutlass	General Discussion	4	March 2nd, 2009 02:53 PM
Broken gear selector needle	FATRATMATT	Eighty-Eight	6	October 16th, 2008 05:21 AM
Broken Motor Mount...	silverriff	Chassis/Body/Frame	7	August 19th, 2008 11:07 AM

August 20th, 2009, 10:26 AM	#2 (permalink)
72 cutlass455 Registered User Join Date: May 2009 Location: Moreno Vally CA Posts: 142	http://www.espo.com/ See if these folks can help. Call them on the phone if you can they are slow at responding to e-mails.