Window sealer?

Colorado Olds · 04-03-2008, 08:36 PM

I thought I just posted this, but it seems to have disappeared.

The back window on Josh's '66 F85 leaks. What is the best way to fix this? Is there some kind of recommended sealer?

Thanks,
Jim

ozoneblue · 04-04-2008, 04:40 AM

3M makes a good sealer Just make sure it's warm & dry

Oldsguy · 04-04-2008, 05:03 AM

You may have leaking around the metal in the channel surrounding the window because of rust. I would recommend a very good inspection repair and/or cleaning first.

Oldsmaniac · 04-04-2008, 06:05 AM

Quote:

Originally Posted by Oldsguy

You may have leaking around the metal in the channel surrounding the window because of rust. I would recommend a very good inspection repair and/or cleaning first.

For sure....the 66-67 2dr roof line around back glass was prone to hold water and rot thru the metal there.

Run to Rund · 04-04-2008, 07:33 AM

First remove the moldings and then the rear glass using the piano wire tool available at professional auto paint shops. Actually I have seen rear windows where the sealer has dried up so much you can push the window out easily. Be careful not to chip the edge of the glass. Get a roll of 3M 1/4" bead #8610 and put it around the channel after cleaning and painting the channel. Use the supplied blocks so the glass won't slide down out of place. Get new molding clips and put 3M 051135 sealer around the channel bottom and part way up, but not preventing the clips from flexing.

04-03-2008, 08:36 PM	#1 (permalink)
Colorado Olds Member Join Date: Jan 2008 Location: Longmont CO Posts: 25	Window sealer? I thought I just posted this, but it seems to have disappeared. The back window on Josh's '66 F85 leaks. What is the best way to fix this? Is there some kind of recommended sealer? Thanks, Jim

04-04-2008, 05:03 AM	#3 (permalink)
Oldsguy Administrator Join Date: May 2004 Location: Lees Summit MO Posts: 2,859	You may have leaking around the metal in the channel surrounding the window because of rust. I would recommend a very good inspection repair and/or cleaning first. __________________ Dan '46 2 door

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
63 98 6 window help just got it	exmoparluver	Ninety-Eight	12	04-13-2008 07:03 AM
Window regulators	68cutlassman	Other	2	03-05-2008 10:52 AM
Window glass!	Jolly Green	442	10	01-05-2008 06:07 PM
73-77 window sweeps	$tryker	Chassis/Body/Frame	2	11-02-2007 06:16 AM
Window help	d14u2nv7	Aurora	2	05-28-2007 09:37 PM

04-04-2008, 04:40 AM	#2 (permalink)
ozoneblue Senior Member Join Date: Jun 2006 Posts: 407	3M makes a good sealer Just make sure it's warm & dry

04-04-2008, 07:33 AM	#5 (permalink)
Run to Rund Senior Member Join Date: Mar 2008 Posts: 108	First remove the moldings and then the rear glass using the piano wire tool available at professional auto paint shops. Actually I have seen rear windows where the sealer has dried up so much you can push the window out easily. Be careful not to chip the edge of the glass. Get a roll of 3M 1/4" bead #8610 and put it around the channel after cleaning and painting the channel. Use the supplied blocks so the glass won't slide down out of place. Get new molding clips and put 3M 051135 sealer around the channel bottom and part way up, but not preventing the clips from flexing.