Oldsmobile 88 Delmont conv '68 Floorpans

Tomppa · 09-10-2007, 03:49 AM

Hi,

I was wondering, if floorpans made for cutlass are the "same" than pans made for 88?
Because i have found floorpans only for cutlass/442. In picture it looks like same, but is it?

These pans i found from Yearone..
Or should i make those pans my self.. it's just so much work

Oldsfan · 09-10-2007, 08:22 AM

Cutlass-based models and 88s are two entirely different cars. As far as I know there is no reproduction sheet metal for 88s and 98s.

Paul

joe_padavano · 09-10-2007, 10:34 AM

Quote:

Originally Posted by Tomppa

Hi,

I was wondering, if floorpans made for cutlass are the "same" than pans made for 88?
Because i have found floorpans only for cutlass/442. In picture it looks like same, but is it?

These pans i found from Yearone..
Or should i make those pans my self.. it's just so much work

What year 88? The 65-70 88s should use the same floor pans as the 65-70 Impalas. The 71-76 88s should be the same as 71-76 Imps/Caprices.

Tomppa · 09-10-2007, 01:04 PM

Quote:

Originally Posted by joe_padavano

What year 88? The 65-70 88s should use the same floor pans as the 65-70 Impalas. The 71-76 88s should be the same as 71-76 Imps/Caprices.

Year was 68..

joe_padavano · 09-10-2007, 07:25 PM

Here ya go:

http://store.shermanparts.com/cgi-bi...ml?img_num=736

Note items 45 - rear floor pan and 46 - front floor pan. These may not be perfect, but I bet they fit just fine.

Tomppa · 09-11-2007, 05:36 AM

Quote:

Originally Posted by joe_padavano

Here ya go:

http://store.shermanparts.com/cgi-bi...ml?img_num=736

Note items 45 - rear floor pan and 46 - front floor pan. These may not be perfect, but I bet they fit just fine.

Thanks for help

09-10-2007, 03:49 AM	#1 (permalink)
Tomppa Junior Member Join Date: Sep 2007 Location: Finland Posts: 5	Oldsmobile 88 Delmont conv '68 Floorpans Hi, I was wondering, if floorpans made for cutlass are the "same" than pans made for 88? Because i have found floorpans only for cutlass/442. In picture it looks like same, but is it? These pans i found from Yearone.. Or should i make those pans my self.. it's just so much work

09-10-2007, 08:22 AM	#2 (permalink)
Oldsfan Senior Member Join Date: Jul 2006 Posts: 427	Cutlass-based models and 88s are two entirely different cars. As far as I know there is no reproduction sheet metal for 88s and 98s. Paul __________________ There's "Something Extra" about owning an OLDS! -- Visit the "Something Extra" website at: http://home.comcast.net/~oldsfan/MySite/62oldspage.html

09-10-2007, 07:25 PM	#5 (permalink)
joe_padavano Moderator Join Date: Mar 2007 Location: Northern VA Posts: 1,159	Here ya go: http://store.shermanparts.com/cgi-bi...ml?img_num=736 Note items 45 - rear floor pan and 46 - front floor pan. These may not be perfect, but I bet they fit just fine. __________________ Joe Padavano 64 Jetstar 88 Conv 66 442 L-69 Conv 68 W-30 69 H/O 69 442 70 W-30 72 442 86 Caprice wagon (w/307 Olds)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Delmont Parts	Skielk	Parts For Sale	5	01-11-2008 11:20 AM
floorpans and rust	kayle	Chassis/Body/Frame	2	05-03-2007 03:58 PM
Looking for Delmont Parts	Skielk	Parts Wanted	4	02-26-2007 01:27 PM
1968 delmont 88	sully	Parts Wanted	6	02-06-2007 05:41 AM
1968 Delmont	Skielk	Parts Wanted	7	12-19-2006 04:44 AM