tredle vac/mc brake hose needed!

53-88 · September 4th, 2007, 01:12 PM

Hey every one. just signed up and excited to be part of the classic olds family. I just picked up a 53 super 88 and am redoing all the brakes. I am just gonna rebuild my tredle-vac for now until I have the time and money to convert to a better system. most of the parts I got from kanter, but I still need the rubber hose that goes from the mc back to the junction block on the frame. Any ideas where to pick this one up? thanks!

ozoneblue · September 8th, 2007, 05:16 AM

I just used a heavy duty heater type hose

53-88 · September 9th, 2007, 10:12 AM

cool thanks...i assume you just used the ends from the original hose?

ozoneblue · September 10th, 2007, 01:25 PM

If yours are in good condition use them

September 4th, 2007, 01:12 PM	#1 (permalink)
53-88 Junior Member Join Date: Sep 2007 Location: N.J. Posts: 3	tredle vac/mc brake hose needed! Hey every one. just signed up and excited to be part of the classic olds family. I just picked up a 53 super 88 and am redoing all the brakes. I am just gonna rebuild my tredle-vac for now until I have the time and money to convert to a better system. most of the parts I got from kanter, but I still need the rubber hose that goes from the mc back to the junction block on the frame. Any ideas where to pick this one up? thanks!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
74' 455 Need routing info for vac lines	Deltarocket	Eighty-Eight	0	June 28th, 2007 09:10 PM
74 455 vac Schematic/diagram	Deltarocket	Big Blocks	0	June 25th, 2007 03:02 PM
With or Without Vacuum Switch? Help! Brake Help Needed	ToronadoGuyDenver	Brakes/Hydraulic Systems	12	March 18th, 2007 03:52 AM
vac lines	<zeke>	Other	1	August 7th, 2004 10:09 PM
Vacuum Hose help???	daddyjws	Small Blocks	2	December 21st, 2003 05:04 AM

September 8th, 2007, 05:16 AM	#2 (permalink)
ozoneblue Registered User Join Date: Jun 2006 Posts: 503	I just used a heavy duty heater type hose

September 9th, 2007, 10:12 AM	#3 (permalink)
53-88 Junior Member Join Date: Sep 2007 Location: N.J. Posts: 3	cool thanks...i assume you just used the ends from the original hose?

September 10th, 2007, 01:25 PM	#4 (permalink)
ozoneblue Registered User Join Date: Jun 2006 Posts: 503	If yours are in good condition use them