conver from a single to dual master cylinder

martine · September 29th, 2002, 11:03 PM

hello i have a 4dr oldsmobile delta88.i have a single line setup on my master cylinder that controls all my braking.and that is stock.but i would like to add a dual line setup.but i was told i would have to cut out part of the fender well and move my wiring around;please tell me if i can achieve this setup.and also if ive got to do any modifications to my vehicle.thanks!

TIREGUY · February 5th, 2004, 11:28 AM

OK, SORRY IT TOOK SO LONG FOR THE REPLY. ALL I COULD COME UP WITH IS USING A SPECIALTY AFTERMARKERT ASSEMBLY. I COULD NOT LOCATE A CROSSOVER BOOSTER SMALL ENOUGH FROM ANOTHER VEHICLE APPLICATION. CLASSIC PERFOMANCE PRODUCTS IS A COMPANY IN BUENA PARK CALIFORNIA THAT SPECIALIZED IN PERFORMANCE BRAKE AND SUSPENSION PARTS THEY CAN BE REACHED AT (714) 522-2000, THIS IS THEIR TECH LINE. THEY ALSO HAVE A WEB SITE www.classicperform.com THEY HAVE DUAL MASTER CYL APLICATIONS WITH DIFFERENT SIZE BOOSTERS FOR TIGHT FIT.

February 5th, 2004, 11:28 AM	#2 (permalink)
TIREGUY Junior Member Join Date: Jan 2004 Location: San Clemente, CA Posts: 9	OK, SORRY IT TOOK SO LONG FOR THE REPLY. ALL I COULD COME UP WITH IS USING A SPECIALTY AFTERMARKERT ASSEMBLY. I COULD NOT LOCATE A CROSSOVER BOOSTER SMALL ENOUGH FROM ANOTHER VEHICLE APPLICATION. CLASSIC PERFOMANCE PRODUCTS IS A COMPANY IN BUENA PARK CALIFORNIA THAT SPECIALIZED IN PERFORMANCE BRAKE AND SUSPENSION PARTS THEY CAN BE REACHED AT (714) 522-2000, THIS IS THEIR TECH LINE. THEY ALSO HAVE A WEB SITE www.classicperform.com THEY HAVE DUAL MASTER CYL APLICATIONS WITH DIFFERENT SIZE BOOSTERS FOR TIGHT FIT. __________________ 55 OLDS SUPER 88 BB454

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
fenders needed for a 72 cutlass	72drptop	Parts Wanted	0	July 5th, 2006 11:54 AM

September 29th, 2002, 11:03 PM	#1 (permalink)
martine Member Join Date: Apr 2002 Posts: 35	hello i have a 4dr oldsmobile delta88.i have a single line setup on my master cylinder that controls all my braking.and that is stock.but i would like to add a dual line setup.but i was told i would have to cut out part of the fender well and move my wiring around;please tell me if i can achieve this setup.and also if ive got to do any modifications to my vehicle.thanks!