'71 442 Emblem Placement

LIMEGREEN71 · August 19th, 2009, 09:42 AM

I need some help with the proper 442 fender and decklid emblem placement. Does anyone have a reference that tells the actual measurements. I have an assembly manual, body manual, etc., but they don't address the exact placement. Thanks!

ziff396 · August 19th, 2009, 05:45 PM

The Parts Place sells the templates. Hope that helps.

BIGJERR · August 19th, 2009, 07:53 PM

I have a set of fenders up in the rafters and was meaning to make a rub for placment but they are sooooooooooooo buried right now...........Jerr

LIMEGREEN71 · August 20th, 2009, 07:19 AM

Thanks Ziff! I found that they were available at several places. I appreciate your suggestion!

August 19th, 2009, 09:42 AM	#1 (permalink)
LIMEGREEN71 Lime Green Convertible Join Date: Mar 2009 Location: Tuscumbia, AL Posts: 11	'71 442 Emblem Placement I need some help with the proper 442 fender and decklid emblem placement. Does anyone have a reference that tells the actual measurements. I have an assembly manual, body manual, etc., but they don't address the exact placement. Thanks!

August 19th, 2009, 07:53 PM	#3 (permalink)
BIGJERR I bleed Oldsmobile Join Date: Dec 2007 Posts: 285	I have a set of fenders up in the rafters and was meaning to make a rub for placment but they are sooooooooooooo buried right now...........Jerr __________________ DIE HARD OLDS GUY......EAT SLEEP LIVE....OLDSMOBILE

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
71 / 72 442 Emblem Placement	LIMEGREEN71	The Newbie Forum	0	August 19th, 2009 09:07 AM
68 Cutlass S Emblem Placement	jdana24	Cutlass	5	July 8th, 2009 08:35 PM
Emblem placement	Chumley	Cutlass	2	May 10th, 2009 07:38 PM
Opinion on 1966 442 rear 1/4 emblem placement	aliensatemybuick	442	1	April 21st, 2009 05:53 AM
69 442 Fender Emblem placement	rsandhoff	Chassis/Body/Frame	3	October 22nd, 2008 08:14 PM

August 19th, 2009, 05:45 PM	#2 (permalink)
ziff396 Registered User Join Date: Jun 2008 Location: Michigan Posts: 63	The Parts Place sells the templates. Hope that helps.

August 20th, 2009, 07:19 AM	#4 (permalink)
LIMEGREEN71 Lime Green Convertible Join Date: Mar 2009 Location: Tuscumbia, AL Posts: 11	Thanks Ziff! I found that they were available at several places. I appreciate your suggestion!