Headlight Tweak: Is this even possible?

KSparkuhl · 11-09-2007, 10:09 PM

Curious to know if it's even possible to tweak the headlight's electrical configuration so that all four headlights will come on when the brights are on. I'm finding on late-night road trips that it would be nice to have the low beams on as well for added illumination. I'm using Sylvania Silverstars as it is, but it seems a waste to have the lows off when you're trying to get more illumination on the roadway... and besides... the added cool factor of having all four headlights on would be icing on the cake.

Any suggestions on how to do this, or would it be super involved?

ozoneblue · 11-10-2007, 05:12 AM

Its easy to do. Just jump the two power wires at dimmer switch with a toggle switch. With lights on high flip the switch,I also added another small indicator light so I would know.This works good on my 90 chevy PU mainly because the plastic lenses have gotten so fogged over the years

KSparkuhl · 11-12-2007, 01:14 PM

Thanks for the suggestion Ozone. Any tips for tracing out the power wires for the low-beams?

ozoneblue · 11-12-2007, 04:52 PM

The colors use to be light green & dark green ,There should only 3 wires on dimmer switch 1 is power With lights on the other 2 for lights

Redog · 11-13-2007, 12:15 PM

You can also pull the relay out and stick a small piece of electrical tape between the contacts.

A lot of guys have done that on Aleromod.com

11-09-2007, 10:09 PM	#1 (permalink)
KSparkuhl Junior Member Join Date: Nov 2007 Posts: 2	Headlight Tweak: Is this even possible? Curious to know if it's even possible to tweak the headlight's electrical configuration so that all four headlights will come on when the brights are on. I'm finding on late-night road trips that it would be nice to have the low beams on as well for added illumination. I'm using Sylvania Silverstars as it is, but it seems a waste to have the lows off when you're trying to get more illumination on the roadway... and besides... the added cool factor of having all four headlights on would be icing on the cake. Any suggestions on how to do this, or would it be super involved? Last edited by KSparkuhl : 11-09-2007 at 10:11 PM. Reason: added comment

11-12-2007, 01:14 PM	#3 (permalink)
KSparkuhl Junior Member Join Date: Nov 2007 Posts: 2	Thanks for the suggestion Ozone. Any tips for tracing out the power wires for the low-beams? __________________ Proud Owner: 2004 Olds Alero Coupe

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Headlight switch	andyg	Electrical	2	06-15-2007 05:05 AM
Headlight bezel	Chumley	Cutlass	2	06-07-2007 10:54 AM
headlight bezels	Chumley	Cutlass	1	11-06-2006 10:04 AM
Headlight help for Olds 98?	jasburns007	Ninety-Eight	5	07-09-2006 02:56 PM
how would i go about changing the headlight?	Richie	Chassis/Body/Frame	0	02-14-2005 02:49 PM

11-10-2007, 05:12 AM	#2 (permalink)
ozoneblue Senior Member Join Date: Jun 2006 Posts: 404	Its easy to do. Just jump the two power wires at dimmer switch with a toggle switch. With lights on high flip the switch,I also added another small indicator light so I would know.This works good on my 90 chevy PU mainly because the plastic lenses have gotten so fogged over the years

11-12-2007, 04:52 PM	#4 (permalink)
ozoneblue Senior Member Join Date: Jun 2006 Posts: 404	The colors use to be light green & dark green ,There should only 3 wires on dimmer switch 1 is power With lights on the other 2 for lights

11-13-2007, 12:15 PM	#5 (permalink)
Redog Alero Chapter Secretary Join Date: Aug 2006 Location: Newtown, PA Posts: 677	You can also pull the relay out and stick a small piece of electrical tape between the contacts. A lot of guys have done that on Aleromod.com