hey guys im doing metal work on my olds cutlass and the time has come to fix the passenger side fender and i've come to the conclusion that it is way out of repair i need a 70, 71, or 72 cutlass passenger side fender with slight or no rust with good inner brace. shipped to south florida. thanks

 

Give John a PM. I know he has these fenders, but he lives in Oregon.
Goes by 2blu442.

You can also check craigslist for parts near you, or go on ebay. There's always fenders and parts in reasonably good shape. Maybe someone close to you in FL would keep the shipping cost down. If you really want to get new, check out Fusicks or Parts Place. Their new licensed reproduction fenders go for around 399 and 379 respectively, plus shipping. Good luck with your project. Hope this info helps.

 

Hello David
Here's one I have for sale. Probably the cheapest shipper would be Greyhound bus lines. With that you would have to pick it up at your local bus station. I'd wrap it in cardboard from an appliance box with stretch wrap and packaging tape. I checked shipping to Tampa and that would run $96 so purchase and shipping combined would be about $200. Let me know if you'd like to see any closeup photos of it. Also if you want to wait and see if something closer is offered that's fine with me. John

P1010367-1.jpg
P1010368-1.jpg
P1010369.jpg
P1010370.jpg
P1010371.jpg

 

I'm in south Florida. E-mail sent. Thanks, Bob.

 

hello john,
i pm'd you

 

I have a pair of 70 fenders with little or no rust and slight damage. I'm in the upper part of SC but were coming to Ormond Beach in September. Let me know if your interested and I'll send some pics. I'll take $75 for the better fender and $50 for the other or $100 for both. I'll look tomorrow to see which one is the better one.

 

1971Olds350, if you can find the parts closer and avoid the shipping costs go for it! Just let me know what you decide after you check out the fenders and possible arrangements from Taz or Bob. John

 

i have nos fenders. they are a bit pricey but what do you expect for new.pm me if interested

john

 

Do you still have this fender?

 

I have dealt with the repop fenders once & that was enough for me.I would rather fix an original,or pay good money for a mint one.They will never be made like that again.
2blu442,
Do you still have that fender available? Do you have a driver's side?

 

if he doesn't i still have nos fenders. no "resonable offer refused.

john

 

72_Nupe and 507OLDS I no longer have that fender and think most of what I have will need some rust repair, but will have solid supports behind the skin. It will probably be next weekend before I can get some photos, but I'll send you pic's of what I have then.

I've got some other years and need to make a new thread offering them.

jhfries, I think your best bet would be to create a new thread under parts for sale and post pictures of your fenders. If your comfortable setting a price that will help others, but that's up to you. John

 

I still have the pair of 71 fenders.

 

John,
Thanks for the reply.
Taz,
Do you have pictures of your 70 fenders?

 

Brian,
Sorry I didn't get back to you sooner but it was some time after you posted that I looked at the forum again. Here's a link that should take you to pictures of the 70 fenders.
Thanks,
Benny


http://s221.photobucket.com/albums/d..._2007/Fenders/