Exhaust question

Thread Tools
 
Search this Thread
 
Old Dec 13, 2008 | 11:51 AM
  #1  
amrcnmscle's Avatar
Thread Starter
69 cutlass owner
 
Joined: Dec 2008
Posts: 10
From: Sorrento, Florida
Exhaust question

im re-doing my exhaust on a 1969 cutlass and i have a 350 rocket and will put on flowtech headers and 3 inch pipes that come out in front of the wheels, my question is what would be the best selection for a muffler to get a nice deep old school rumble out of it. i want it loud and deep. please give any advice....
Old Dec 13, 2008 | 12:16 PM
  #2  
joe_padavano's Avatar
Old(s) Fart
 
Joined: Mar 2007
Posts: 50,815
From: Northern VA
Originally Posted by amrcnmscle
im re-doing my exhaust on a 1969 cutlass and i have a 350 rocket and will put on flowtech headers and 3 inch pipes that come out in front of the wheels, my question is what would be the best selection for a muffler to get a nice deep old school rumble out of it. i want it loud and deep. please give any advice....
Walker Dynomax mufflers consistently outflow the (no)Flowmasters in magazine tests and are much less obnoxious and droning. Of course, a 350 probably can't use 3" pipes. Go with the less expensive 2.5" pipes and use an X pipe.
Old Dec 13, 2008 | 04:57 PM
  #3  
The Stickman's Avatar
Registered User
 
Joined: Nov 2008
Posts: 745
From: Lehigh Valley Pa
Also keep in mind that some states it is illegal to have the pipes come out in front of the rear wheel because the fumes could get into the passenger compartment.
Old Dec 13, 2008 | 05:28 PM
  #4  
85olds442's Avatar
Registered User
 
Joined: Nov 2008
Posts: 34
From: Colorado
The Dynomax Race Magnum mufflers are really Loud and flow really well. I agree that
2 1/2" would be the way to go for size, unless you have ALOT of compression and Alot of Head work. 3 " you would be louder, but you would sacrifice low end torque. The Flow Path mufflers flow Really good and are really loud, however I do not know if they still make them. Personally I would use the Dynomax Super Turbo Mufflers, because they have a old school sound and flow REALLY GOOD!!!! Hope this helps.
Old Dec 13, 2008 | 06:35 PM
  #5  
Eric Anderson's Avatar
Registered User
 
Joined: Oct 2008
Posts: 766
From: North East PA
I'll vote 2 1/2 " with x pipe also you can go with mandrel bent pipes for a couple exta $'s and as for Dyonomax, IMHO the best, I've used them on most vehicles I've owned( all that I've changed the ex. on you can't go wrong with them)
Old Dec 13, 2008 | 09:31 PM
  #6  
projectheaven's Avatar
Registered User
 
Joined: Dec 2007
Posts: 330
From: San Francisco bay area
http://www.youtube.com/watch?v=hbBAylkOoNw

Here's a sound clip of my exhaust.Sorry for the long video. I have 40 series flowmasters,dual exhaust with flowtech headers and new 2.5 inch pipes from the full length headers to the 4 inch exhaust tips behind the rear wheels.
I'm glad to hear that you want to keep it loud. 3 inch exhaust maybe overkill though.I have a 350 rocket but am swapping a 455 in the next few weeks.I'll go with 3 inch exhaust then.
Good luck with whatever you decide to do.
Old Dec 16, 2008 | 01:41 PM
  #7  
amrcnmscle's Avatar
Thread Starter
69 cutlass owner
 
Joined: Dec 2008
Posts: 10
From: Sorrento, Florida
does anyone know if it is illegal to have the exhaust in front of the rear wheels in the state of florida? i cant find information on it

thnks
Old Dec 17, 2008 | 05:21 AM
  #8  
Oldsguy's Avatar
Past Administrator
 
Joined: May 2004
Posts: 10,360
From: Rural Waxahachie Texas
If you state requires vehicle inspections just ask any station or shop that does them. They can tell you yes or no.
Old Dec 17, 2008 | 06:53 AM
  #9  
88 coupe's Avatar
Junior Member
 
Joined: Oct 2004
Posts: 2,212
From: Southern CA
Or any muffler shop.

Norm
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
atkinsom
General Discussion
7
May 29, 2013 06:39 PM
65OldsDelta88SuperRocket
Big Blocks
2
Oct 27, 2011 09:16 PM
WasteOfMind00
Small Blocks
12
Apr 19, 2007 01:30 AM
kylem4711
Big Blocks
5
Mar 14, 2007 01:42 PM




All times are GMT -7. The time now is 11:01 AM.