Replacing Hard linkage

tbento · 01-10-2007, 12:38 PM

Greeting all 442 friends,

Im looking for some links and advice on replacing the stock hard throttle linkage on 66 -442 to a cable system. I was given some advice from Summit and they told me to use pn SRK-4000 (cable) and TC1000HT (bracket assembly). Looking at the parts from face value it doesnt look as though that is all I will need to do a direct replacement. Any thoughts on this?

Your help is greatly appreciated!
Best regards,
Tom

duckblaster67 · 01-12-2007, 09:47 PM

I would try to find a newer 70s GM A-body car with a cable throttle as a donor for yours. You should be able to use the gas pedal, cable, and carb bracket without much difficulty.

01-10-2007, 12:38 PM	#1 (permalink)
tbento Junior Member Join Date: Jan 2007 Posts: 1	Replacing Hard linkage Greeting all 442 friends, Im looking for some links and advice on replacing the stock hard throttle linkage on 66 -442 to a cable system. I was given some advice from Summit and they told me to use pn SRK-4000 (cable) and TC1000HT (bracket assembly). Looking at the parts from face value it doesnt look as though that is all I will need to do a direct replacement. Any thoughts on this? Your help is greatly appreciated! Best regards, Tom

01-12-2007, 09:47 PM	#2 (permalink)
duckblaster67 Junior Member Join Date: Jan 2007 Location: South Dakota Posts: 23	hard linkage I would try to find a newer 70s GM A-body car with a cable throttle as a donor for yours. You should be able to use the gas pedal, cable, and carb bracket without much difficulty.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode