View Single Post
Old 07-04-2008, 08:36 AM   #6 (permalink)
dagr8tim
Junior Member
 
Join Date: May 2008
Posts: 12
Send a message via AIM to dagr8tim Send a message via Yahoo to dagr8tim
Quote:
Originally Posted by Redog View Post
Gently pull off the panel at the C Pillar. If it's a 4 door it will come off and hang down, the 2 door piece is much larger and you might have to remove the coat hook.

The mod is right there and held in by a 10 mm bolt. There are 3 wires pluged into it. 2 for the defroster and 1 for the radio anntena. Unplug, swap mods, and plug in and bolt in snugly (grounded here).

If you take the mod apart, you can souder the connenctions for the defroster and it will never break again
Cool, is it on the driver's or passenger's side? I'm going to hit my local yard to practice pulling the part before I pull it on her car. Plus, last time I needed a dealer item like that, it was $800 worth of headlight harness that I got for $3 at the yard.

Thanks for the tip on soldering it. If I score one at the yard, I'll probably solder it before I even install it.
__________________
A)bort, R)etry, I)nfluence with large hammer

1993 Olds Cutlass Ciera
1999 Mercury Grand Marquis
2004 Olds Alero
dagr8tim is offline   Reply With Quote