I started pulling the interior panels on my 67 Cutlass Supreme last week. I've got everything off but the upper rear panels. The lower, armrest part is off. As is the upper seat filler part. I removed all the screws and the panel seems to be holding near the window. So is there a trick to this or what. It looks like it needs to come forward and up. I've pried, pulled & pushed. I afraid if I keep prying & pulling I'll destroy them. Anybody know what I'm missing?

Thanks, Don

 

Is this the side panel below the window? If it is there maybe 1 or 2 screws that go through the window fuzzies. You need to drop the quarter glass and find the screws.
Ken

 

Most have clips attached to the panel at the top. You should be able to to remove the panels by pushing in toward the glass then lifting up at the same time.

 

Thanks! I'll check/try both when I get time.

Don

 

Don I have a complete assembly manual for my 67 I am in the final stages of assembly with. I would be glad to copy the pages that show the panels or you are welcome to take a trip down to Lebanon and look at mine. I have the entire interior still out of mine. If i remember there are screws behind the roof line panels, the ones with the lights in them. I really don't remember for sure bacause mine came apart over a year ago! Let me know if I can help.