View Single Post
Old 06-24-2006, 07:42 PM   #1 (permalink)
kebird1
Junior Member
 
Join Date: Jun 2006
Posts: 4
Problems with LED display Panel

Hi,I own a 1989 "Toronato" for 5 years now with 81000 mls. i am experiancing intermitten LED display problems of and on.I do not drive the car in winter time and is kept in garage. When i do take it for a spin after sitting for 2 or 3 month I find after engine start that Bars on displays Gas,Oil,Voltage and Temp.are not properly Lit.meaning, that first 2 bars are lit,next 1 or 2 are shadowed and next lit Ect.In most cases they will reset themselfs to be Ok after driving for 5 or 10 min.then ok for a couple of month and it will happened again sometimes reset in short order other times at longer periods.
About 1 week ago after start up,the Info. Line letters lit up as it should,but noticed Like a horizontal line go thru with top half of letters clear,bottom half of letters flashing and within 20 sec.it apeared Line Rolled downwards now only top half of letters are clearly visible.So far they have not reset themselfs.
2 days ago i started Car when display appeared It showed Speedo to Read a reverse 688 and Voltage as well as Temp.Gage did not Lite,Gas and Oil pressure gage showed all bars lit.toke it for a drive around Block no change in display Left idle in driveway came back to correct display.this morning same thing but came back 30 sec,latter.drove 60 mls today and no problems but INFO line still only Half line.Any Ideas as what to look for in my problems or talk to correct. thanks Guys.Sieg Kleine
kebird1 is offline   Reply With Quote