ClassicOldsmobile.com - View Single Post

Capriceguy · December 1st, 2007, 06:37 AM

Hi guys,

I have a complete olds 455 for trade.
-bored .030 over
-ported C heads, shaved .020 for higher compression. Intake face machine to compensate
-Edelbrock torker intake
-mild tow cam
-HEI distributor

The engines last home was in an 82 Firebird. The combo ran a 13.2 quarter mile through exhaust manifolds and without any dial-in of the carb.

I also have a BOP TH350 with a B&M shift kit that I'll throw in.

I picked the combo up with the intention of putting it in my 1969 Caprice. But if someone out there has a big block Chevy that they are interested in trading for this setup, I am all ears as it will make my swap slightly easier.

I am located near Akron Ohio.

December 1st, 2007, 06:37 AM	#1 (permalink)
Capriceguy Junior Member Join Date: Dec 2007 Posts: 17	Olds 455 for trade Hi guys, I have a complete olds 455 for trade. -bored .030 over -ported C heads, shaved .020 for higher compression. Intake face machine to compensate -Edelbrock torker intake -mild tow cam -HEI distributor The engines last home was in an 82 Firebird. The combo ran a 13.2 quarter mile through exhaust manifolds and without any dial-in of the carb. I also have a BOP TH350 with a B&M shift kit that I'll throw in. I picked the combo up with the intention of putting it in my 1969 Caprice. But if someone out there has a big block Chevy that they are interested in trading for this setup, I am all ears as it will make my swap slightly easier. I am located near Akron Ohio.