ClassicOldsmobile.com - View Single Post

W30post · 11-24-2007, 05:33 PM

OK, finally I fixed this problem. It appears that bleeding this system out with a vacuum pump is the way to go. I forced air from the rear to the front with the pressure of an air hose at around 45 PSI while the master as disconnected. Then I immediately followed by vacuum bleeding the system until I got fluid to the rear. Problem solved.

Thanks for the advice.

11-24-2007, 05:33 PM	#12 (permalink)
W30post Member Join Date: Oct 2007 Posts: 33	OK, finally I fixed this problem. It appears that bleeding this system out with a vacuum pump is the way to go. I forced air from the rear to the front with the pressure of an air hose at around 45 PSI while the master as disconnected. Then I immediately followed by vacuum bleeding the system until I got fluid to the rear. Problem solved. Thanks for the advice.