|
the turn signals and tail light issues could all be linked to a faulty turn signal switch in the steering column. All rear light signals go through this switch. Is the hazard switch functioning also? I had a problem where I put my foot on the brake and all the lights came on. The hazard switch was set but was not blinking. Press hte brake and it would interrupt the signal, like it is supposed to, and cause all the lights to come on. Took a little while on that one.
As for the high beams, I was not aware of the year that they decided to change over to column activated. If hers is on the column and when you pull back you hear no click, the switch has gotten out of adjustment on the top of the columnn under the dash. If you can hear a click it is most likely a bad switch.
Give us more details as you find them.
|