Quote:
Originally Posted by ToronadoGuyDenver
The Carburetor is newly remanufactured .........
|
Big difference between new and remanufactured.
If you had your own working carb rebuilt, you should be able to work with it. If it came from a mass rebuilder, good luck.
Quote:
|
........ it needs to be rejeted due to the high altitude .........
|
If the test is run on a chassis dyno, as is done here in CA, yes. If it's tested at idle, leaner jetting will not affect the outcome.
Quote:
|
........ The gas is just dumping in the carburetor ........
|
If it is, leaning the jets will not help. Check the float level, inlet valve, and fuel pressure.
If you exaggerated, disregard my last.
Norm