|
I suspected that ya would trouble with this.....You may try drilling it some then get a bigger easyout that you can use more force with.....You cant drill it too much because then the easy out exerts outward pressure on the broken piece making it harder to remove. I believe you are working with 1/8 inch pipe....not much to get a bite on it with anything. The threads are pipe threads and if they get buggered up you may have to go with 1/4 inch pipe and a reducer bushing....If I were you I would call around to a machine shop and see if they will get the piece out for you....You can get a tapered metal punch or drift and just hammer it in the hole so you can drive the car to a shop.
|