Cracked power steering manifold?
January 9th, 2011, 03:21 PM
#1
Registered User
Thread Starter
Join Date: Jan 2009
Location: Seattle
Posts: 112
Cracked power steering manifold?
I can't find a new one anywhere should I just epoxy it or run it as is? It seems that a crack in it wont effect how it works and all it is for is to just hold the stud for the lid and hold the filter in place it still does that with the crack.
IMAG0022.jpg
IMAG0021.jpg
IMAG0023.jpg
IMAG0022.jpg
IMAG0021.jpg
IMAG0023.jpg
January 9th, 2011, 03:38 PM
#2
Registered User
Join Date: Feb 2008
Location: Plano, TX
Posts: 11,798
In last resort, JB Weld.
http://jbweld.net/faq.php
Looks like there is a lot of surface for it to bond to, so as long as it is deep cleaned like the directions say (acetone / lacquer thinner) then I think it will work.
http://jbweld.net/faq.php
Looks like there is a lot of surface for it to bond to, so as long as it is deep cleaned like the directions say (acetone / lacquer thinner) then I think it will work.
Thread
Thread Starter
Forum
Replies
Last Post
KRICHEN922
Small Blocks
48
December 5th, 2009 09:39 AM
