1946 Oldsmobile suspension?
#2
I imagine it's short, long arm suspension up front and a solid rear axle in the rear with trailing arms and leaf or coil springs. I suppose it might have king pins up front.
Someone will come along and know for sure.
Someone will come along and know for sure.
#3
Your Front End is:
Your Front End is the King Pins set, Upper & Lower Outer Pin Kits in the Upper & Lower Control Arms at the front end of the arms, Upper & Lower Control Arm shafts with Metal Bushings at the back end of the Upper & Lower Control Arms...
For steering, there is a "tubular" center link and inner tie rods assembly, and then tie rod sleeves, and outer tie rods that go to the wheel.
Then for the Stabilizer bar, there are Stabilizer Links & Sway Bar Frame Bushings.
That is everything for your front end -- the suspension, steering, & the rest....
I have everything in stock Brand New U.S.A. made except the 1 item that would have to be rebuilt only, if it shows too much wear....
Always best to simply call me -- Craig -- 516 - 485 - 1935.......New York......
For steering, there is a "tubular" center link and inner tie rods assembly, and then tie rod sleeves, and outer tie rods that go to the wheel.
Then for the Stabilizer bar, there are Stabilizer Links & Sway Bar Frame Bushings.
That is everything for your front end -- the suspension, steering, & the rest....
I have everything in stock Brand New U.S.A. made except the 1 item that would have to be rebuilt only, if it shows too much wear....
Always best to simply call me -- Craig -- 516 - 485 - 1935.......New York......
#4
Your Front End is the King Pins set, Upper & Lower Outer Pin Kits in the Upper & Lower Control Arms at the front end of the arms, Upper & Lower Control Arm shafts with Metal Bushings at the back end of the Upper & Lower Control Arms...
For steering, there is a "tubular" center link and inner tie rods assembly, and then tie rod sleeves, and outer tie rods that go to the wheel.
Then for the Stabilizer bar, there are Stabilizer Links & Sway Bar Frame Bushings.
That is everything for your front end -- the suspension, steering, & the rest....
I have everything in stock Brand New U.S.A. made except the 1 item that would have to be rebuilt only, if it shows too much wear....
Always best to simply call me -- Craig -- 516 - 485 - 1935.......New York......
For steering, there is a "tubular" center link and inner tie rods assembly, and then tie rod sleeves, and outer tie rods that go to the wheel.
Then for the Stabilizer bar, there are Stabilizer Links & Sway Bar Frame Bushings.
That is everything for your front end -- the suspension, steering, & the rest....
I have everything in stock Brand New U.S.A. made except the 1 item that would have to be rebuilt only, if it shows too much wear....
Always best to simply call me -- Craig -- 516 - 485 - 1935.......New York......
#5
There are no actual moving parts....
All my parts are stock, are geared toward stock, and that's all the conventional world of parts -- forever -- solely catered to...
If you want it "lowered" --- leave a sagging rear end in there -- and don't replace them....
As far as the front goes; there are outfits out there that will cut your springs -- and re-fit them....
To tell you the truth (because that's all I know) I WOULD NOT do that because cars were not designed to be driven that way -- and you compromise its strength.....
That being said, it is a free country, and you are permitted to do whatever you like.....
#6
There is no actual "rear suspension" -- in the rear, the car is "lifted" by Rear Leaf Springs, and its accompanying shackles and bolts...
There are no actual moving parts....
All my parts are stock, are geared toward stock, and that's all the conventional world of parts -- forever -- solely catered to...
If you want it "lowered" --- leave a sagging rear end in there -- and don't replace them....
As far as the front goes; there are outfits out there that will cut your springs -- and re-fit them....
To tell you the truth (because that's all I know) I WOULD NOT do that because cars were not designed to be driven that way -- and you compromise its strength.....
That being said, it is a free country, and you are permitted to do whatever you like.....
There are no actual moving parts....
All my parts are stock, are geared toward stock, and that's all the conventional world of parts -- forever -- solely catered to...
If you want it "lowered" --- leave a sagging rear end in there -- and don't replace them....
As far as the front goes; there are outfits out there that will cut your springs -- and re-fit them....
To tell you the truth (because that's all I know) I WOULD NOT do that because cars were not designed to be driven that way -- and you compromise its strength.....
That being said, it is a free country, and you are permitted to do whatever you like.....
#8
Rear End
If Sporty45 has the car, and saw what he has back there -- then there's your answer...
Rear End is not really "my department" -- my coil spring book shows nothing -- and 98 % of the cars back then used rear leaf springs.....
So that "is what it is" and I don't have that car to be able to look at it...
My department is Front End --- all parts right by part #....
Rear End is not really "my department" -- my coil spring book shows nothing -- and 98 % of the cars back then used rear leaf springs.....
So that "is what it is" and I don't have that car to be able to look at it...
My department is Front End --- all parts right by part #....
#9
You are correct, Oldsmobiles of this era are coil spring rear suspension.
The rear suspension can be lowered by using aftermarket coils. I used 3 inch lowering coils on the rear of the convertible but would recommend 2 inch lowering as I ran into an issue of not being able to find rear shocks that had compatible travel with the lowering coil springs travel. I was grounding out shock travel and ruined one set of rear shocks. I wound up fabricating lower rear shock mounts that allowed a longer travel shock to be used. I could still get the car on a hoist but it was very close to scraping the lower rear shock mounts after all the work was done. Ride was OK but not as good as stock. You give up something to get the look you want.
Google to find the lowering rear coil springs. I didn't keep the receipt so can't give you a company, but was able to source my rear coils from a company in California. Since the coils are a decreasing radius at their ends don't try cutting your stock coil springs to drop ride height.
Jerry
The rear suspension can be lowered by using aftermarket coils. I used 3 inch lowering coils on the rear of the convertible but would recommend 2 inch lowering as I ran into an issue of not being able to find rear shocks that had compatible travel with the lowering coil springs travel. I was grounding out shock travel and ruined one set of rear shocks. I wound up fabricating lower rear shock mounts that allowed a longer travel shock to be used. I could still get the car on a hoist but it was very close to scraping the lower rear shock mounts after all the work was done. Ride was OK but not as good as stock. You give up something to get the look you want.
Google to find the lowering rear coil springs. I didn't keep the receipt so can't give you a company, but was able to source my rear coils from a company in California. Since the coils are a decreasing radius at their ends don't try cutting your stock coil springs to drop ride height.
Jerry
Thread
Thread Starter
Forum
Replies
Last Post