Looking for proven build sheet
#3
I have a 355
10 to 1 compression , speed pro flat tops
edelbrock rpm intake 750 holley double pumper
lunati voodoo cam 522/539 lift 233/241 duration @ .050
Prw full roller rockers ( ford 1.6)
Pro gear timing chain
#6 heads with 2.07 in. 1.63 ex. valves
full length headers x pipe
proform hei with 34 degree total by 3200 rpm
backed by a th350 i built and an ebay vendor 3000 stall
with 3.90 gears and 28 in. tall tires.
So far with me in it it sits at 3450 lbs and has gone a best of 12.45 @ 106.7 mph with a 1.75 60 ft.
I dont run a/c , No power steering and i still have enough vacuum for brake which are power drums all around.
Shooting for high 11's this summer with fully ported heads , solid lifter cam and about 200 lbs lighter and a 3400 stall.
10 to 1 compression , speed pro flat tops
edelbrock rpm intake 750 holley double pumper
lunati voodoo cam 522/539 lift 233/241 duration @ .050
Prw full roller rockers ( ford 1.6)
Pro gear timing chain
#6 heads with 2.07 in. 1.63 ex. valves
full length headers x pipe
proform hei with 34 degree total by 3200 rpm
backed by a th350 i built and an ebay vendor 3000 stall
with 3.90 gears and 28 in. tall tires.
So far with me in it it sits at 3450 lbs and has gone a best of 12.45 @ 106.7 mph with a 1.75 60 ft.
I dont run a/c , No power steering and i still have enough vacuum for brake which are power drums all around.
Shooting for high 11's this summer with fully ported heads , solid lifter cam and about 200 lbs lighter and a 3400 stall.
Thread
Thread Starter
Forum
Replies
Last Post
jstrits
General Discussion
35
October 18th, 2017 08:17 AM