68 Cutlass S Conv Vent Windows/Glass
#2
If you just need the glass or the glass and frame they are pressed into then they are the same for a hardtop (non post) or a convertible. If you're looking for the whole assembly the outer frame is specific to a convertible.
Front windshield trim is specific to a convertible
Last edited by allyolds68; June 10th, 2015 at 01:39 PM.
#11
Vented
Xlhowie- if you are still in the market I have the LH to Scotts RH, he is amenable so I can hand mine to him at Homecoming & you two could work out shipping, $60 + ship for the pair, here are pic's of mine.
Regards,
Brett
Regards,
Brett
#14
68 Cutlii Convertible
But the above numbers are correct for 68 Cutlii Convertibles vent window assembly, the number shown on the pic's of the frame leg are only for the complete assemble. The glass & other components have their own separate/different numbers. And as Mike stated in post#2 above, the glass & stainless 'frame' around just the glass, is common to other models. But the trim and mounting frame assembly as shown in my pics are to what I am referring the above part numbers.
Brett
Brett
#15
I was looking at the pics not the writing
Not sure what you mean that I've posted 2 #'s for LH & 2 diff #'s for RH?
But the above numbers are correct for 68 Cutlii Convertibles vent window assembly, the number shown on the pic's of the frame leg are only for the complete assemble. The glass & other components have their own separate/different numbers. And as Mike stated in post#2 above, the glass & stainless 'frame' around just the glass, is common to other models. But the trim and mounting frame assembly as shown in my pics are to what I am referring the above part numbers.
Brett
Brett
But the above numbers are correct for 68 Cutlii Convertibles vent window assembly, the number shown on the pic's of the frame leg are only for the complete assemble. The glass & other components have their own separate/different numbers. And as Mike stated in post#2 above, the glass & stainless 'frame' around just the glass, is common to other models. But the trim and mounting frame assembly as shown in my pics are to what I am referring the above part numbers.
Brett
Brett
#16
#18
BTW these vent windows assemblies were used on all a-bodies so they aren't really rare. There's a chevelle guy on Long Island that sells restored sets for a lot of money (like $600-700). I've got three or four core sets that I'm eventually going to trade in to him + cash for a restored set. I got a quote to rechrome mine for like $400. It's hard to find a set that's not pitted.
#19
I really need a LT one
Thanks for all the good info. What is the chrome condition of the LT one? Not worried about the unseen parts and I have new seals. If the trim is in pretty good condition I'll buy them. My zip is 33578 Riverview Fl.
For 68 Cutlass Conv 246, 247 part numbers
Thx,
Howie
#20
Howie I will take some better pic's after the rain stops this afternoon. I have the LH 247.
Brett
ps don't worry about misinterpretation of the postings, I use my iPhony all the time and its always jumping posts and thus changing peoples intent. No worries.
Brett
ps don't worry about misinterpretation of the postings, I use my iPhony all the time and its always jumping posts and thus changing peoples intent. No worries.
#22
I am also looking for rear power window set up for both sides. I am wired but all the parts are gone. Know anyone?
I have the glass, need motors and regulators, and guides.
Howie
I have the glass, need motors and regulators, and guides.
Howie
#23
I can't help you with power but if decide to go manual I've got at least one set, maybe two.
#25
Thread
Thread Starter
Forum
Replies
Last Post