394 transmission adapter
#1
394 transmission adapter
looking for a discount trans adapter maybe that someone bought and wants to unload because they never used it. th350/700r/200/th400/727... whatever is not a roto hydramatic 10. whatcha got? Vrooom! chirp..
thanks.
857-526-six zero five nine
thanks.
857-526-six zero five nine
#3
Ive contated tony at ross. and for what is pictured there, $3500.. that is pretty expensive and that is sending him my trans and it comes back looking like that (so i still have to buy a trans).. The bendesn kit is $1395. I was hoping someone had the old kit that was like $700 and it never got installed and was sitting in a box in their garage, like the hundreds of parts i have sitting around.. or maybe a take off of one someone installed, then changed out motors or what not.. idk.. but i dont have $4500 to invest into my $3500 car.
#4
The more i think about it.. if i was half the man i think i am. i would make my own.. how hard can it be? .its just a slab of metal with the correct spacing and has 394 bolt pattern on the big side and th350 pump bolt pattern on the other.. you think vic edelbrock sat around waiting for someone to invent a cheap kit? to be continued.. but in the mean time feel free to dontate one to my go fund me page if you want.
#5
WOW $3500, I didn't see prices except for the Bendtsen kit... I thought it was expensive for 1/3 the price.
I figured the Ross kit was similar to the $300-500 JW Performance bell housings that are everywhere for other applications.
I figured the Ross kit was similar to the $300-500 JW Performance bell housings that are everywhere for other applications.
#6
Tony would like to sell you the whole deal .
If you insist , he will sell the adapter only . And you ( or your local machinist ) can cut your trans.
The trans will have to be disassembled to cut the case . So you will need a rebuild kit .
You will also need a special flywheel , which Tony also supplies .
If you do all the work yourself , you might be able to do the job for less than half of that $3500 .
If you insist , he will sell the adapter only . And you ( or your local machinist ) can cut your trans.
The trans will have to be disassembled to cut the case . So you will need a rebuild kit .
You will also need a special flywheel , which Tony also supplies .
If you do all the work yourself , you might be able to do the job for less than half of that $3500 .
Thread
Thread Starter
Forum
Replies
Last Post