Wanted for 1967 Delta 88
#1
Wanted for 1967 Delta 88
UPDATE 1/29/19:
I've scored some of the parts thanks to members here. Still need the wheel opening trim and I forgot the rear bumper fillers.
Need the following for my 1967 Delta 88 Holiday Coupe.
Thanks. Shipping will be to zip code 20180, or I can pay now and pick up at Spring Carlisle.
I've scored some of the parts thanks to members here. Still need the wheel opening trim and I forgot the rear bumper fillers.
Need the following for my 1967 Delta 88 Holiday Coupe.
- Both rear rubber bumper fillers (these are not reproduced)
Left front fender extension. Mine was hit and tweaked. You can't straighten pot metal. All 1967 full size are the same.- Front wheel opening trim. Must be for a Delta 88 - Delta Custom and Delmont are different. A prior owner cleverly put screws through mine to hold it in place.
Inside left (driver side) A-pillar trim. Mine is the optional anodized aluminum, not painted steel. This is unique to holiday coupes. Bonneville is apparently the same. A prior owner cleverly drilled a big hole in mine for a spotlight.Front license plate bracket.
Thanks. Shipping will be to zip code 20180, or I can pay now and pick up at Spring Carlisle.
#4
The plate bracket is different, but the A-pillar trim is apparently the same on all 66s except convertibles. I'm looking for the chrome (actually anodized aluminum) trim, not the painted ones. I'll take them if you have them.
#5
the previous owner of this 66 was using a delta and a starfire for donor cars and there are plenty of loose trim in the trunk.i may have saved the plate bracket from the 67 delmont i had,i know the car had old mass plates on it when i got it.i will try to look for it,my parts shed is a mess
#6
Parting out a 1968 Delta Custome
Hello Joe, I am parting out a 1968 Delta Costume 4 door. Don't think the fender extensions will work, and not sure of the chrome. There will be plenty of other parts that should be interchangeable between a 67 and 68. Feel free to touch base if I can be of service. Live around Morgantown WV.
#7
Hello Joe, I am parting out a 1968 Delta Costume 4 door. Don't think the fender extensions will work, and not sure of the chrome. There will be plenty of other parts that should be interchangeable between a 67 and 68. Feel free to touch base if I can be of service. Live around Morgantown WV.
#9
Joe, have you found the A pillar trim yet? I really don't think I've pulled parts off of a 1966 or 67 Olds 88 but on the off chance I don't remember I've dug out some anodized A pillar trim. I know I've got another set somewhere but haven't come up with it yet. If any of these look close to the size/shape I can take more measurements or photos. Let me know what you think. John
#10
Joe, have you found the A pillar trim yet? I really don't think I've pulled parts off of a 1966 or 67 Olds 88 but on the off chance I don't remember I've dug out some anodized A pillar trim. I know I've got another set somewhere but haven't come up with it yet. If any of these look close to the size/shape I can take more measurements or photos. Let me know what you think. John
#12
Joe kmows
On drivers side , in front of a/c condenser mounted to the lower portion of core support is a cylinder couple inches in diameter , about 4 " long with openings L&R & a wire runs through that up to a squareish black metal box...foundbuild sheet under carpet in rear behind driver but it will take sum doin to extract it & low on list atm...67 B - body 4 dr
can get pix but mite hav to clean up first as quite certain I'll crap kittens should day arive you are either unknowledgeble or incorrect
Thanks for th help
can get pix but mite hav to clean up first as quite certain I'll crap kittens should day arive you are either unknowledgeble or incorrect
Thanks for th help
Thread
Thread Starter
Forum
Replies
Last Post
Jake Mack
Parts Wanted
4
April 9th, 2016 08:25 AM
DownBoy
Parts Wanted
2
March 31st, 2014 08:25 AM