BBO adapter plates for serpentine set up
May 15th, 2018, 02:45 PM
#1
Registered User
Thread Starter
Join Date: Jun 2010
Posts: 98
BBO adapter plates for serpentine set up
$200 plus shipping.
It is best to reach me at ExtremeSupremeMachine@gmail.com
You will receive three pieces,an adapter plate for the driver's side,passenger side,and the lower support bracket for the driver's side.
You need to use the crank pulley from a 302 Ford, the reverse rotation water pump from a diesel V6 Olds engine.
I'll also throw in the necessary flat head screws needed.
Here is the thread from ROP that has a lot of good info on the swap.
https://www.tapatalk.com/groups/real...ates-t252.html
It is best to reach me at ExtremeSupremeMachine@gmail.com
You will receive three pieces,an adapter plate for the driver's side,passenger side,and the lower support bracket for the driver's side.
You need to use the crank pulley from a 302 Ford, the reverse rotation water pump from a diesel V6 Olds engine.
I'll also throw in the necessary flat head screws needed.
Here is the thread from ROP that has a lot of good info on the swap.
https://www.tapatalk.com/groups/real...ates-t252.html
Last edited by O.P.LARRY; May 15th, 2018 at 02:55 PM.
Thread
Thread Starter
Forum
Replies
Last Post
O.P.LARRY
Parts For Sale
7
January 29th, 2020 02:27 AM
