ported heads
#1
ported heads
These are nice heads that can get a full weight A body into the mid 10's when paired with the right components. I can sell these configured a few different ways as follows:
A castings
75cc chambers
machine work by Weber Racing of N.Ridgeville, OH
ported by Jeff Ondo of Elyria, OH I was told they flow 278 @.600 on his SF600
Milodon 2.07/1.71 valves
heat risers and exhaust crossovers filled
bronze guide liners
stud pads milled for guideplates
drilled & tapped for 7/16" studs
pushrod holes opened to 9/16"
head stud holes opened to 17/32"
3 angle valve job
pressure checked after all porting and machining
price=$850
all above plus the following:
Engle 361 valvesprings w/retainers and locks
145lbs. @1.700 installed height
330lbs. @.600 lift
price=$950
all above plus the following:
3/8" guideplates
7/16" ARP studs
price=$1000
all above plus the following:
Harland Sharpe 5003 rockers w/poly locks
price=$1200
All parts have zero miles and were used only for cam break in and then stored for the past 10+ years. I can deliver these to Norwalk on July 28th for no charge if paid in advance.
IMG_20130603_182945_047.jpg
IMG_20130603_181403_030.jpg
IMG_20130603_182019_147.jpg
IMG_20130409_163901_471.jpg
A castings
75cc chambers
machine work by Weber Racing of N.Ridgeville, OH
ported by Jeff Ondo of Elyria, OH I was told they flow 278 @.600 on his SF600
Milodon 2.07/1.71 valves
heat risers and exhaust crossovers filled
bronze guide liners
stud pads milled for guideplates
drilled & tapped for 7/16" studs
pushrod holes opened to 9/16"
head stud holes opened to 17/32"
3 angle valve job
pressure checked after all porting and machining
price=$850
all above plus the following:
Engle 361 valvesprings w/retainers and locks
145lbs. @1.700 installed height
330lbs. @.600 lift
price=$950
all above plus the following:
3/8" guideplates
7/16" ARP studs
price=$1000
all above plus the following:
Harland Sharpe 5003 rockers w/poly locks
price=$1200
All parts have zero miles and were used only for cam break in and then stored for the past 10+ years. I can deliver these to Norwalk on July 28th for no charge if paid in advance.
IMG_20130603_182945_047.jpg
IMG_20130603_181403_030.jpg
IMG_20130603_182019_147.jpg
IMG_20130409_163901_471.jpg
Thread
Thread Starter
Forum
Replies
Last Post
gearheads78
Parts For Sale
5
July 5th, 2010 10:25 AM