Brand new seat repair spring - 25ft Rolls 9ga & 11ga
#1
Brand new seat repair spring - 25ft Rolls 9ga & 11ga
Brand new made in USA seat spring rolls- The correct size for GM seats!
25ft Rolls of 9ga
25ft Rolls if 11ga
(9ga used in lower cushions, 11ga used in upper cushions)
$40 / 1-25ft roll
$60 / 2-25ft rolls
$80 / 3-25ft rolls
$100 / 4-25ft rolls
+shipping
email me: ben@classicseat.com
If you are redoing your seats, and have a handful of broken or badly rusted springs- these are exactly what you need.
I have these listed on ebay, but I'd rather sell directly to you guys and save the ebay hassle. Prices are slightly lower here as well.
** if you want longer or shorter lengths I can do that as well. let me know what you need.
25ft Rolls of 9ga
25ft Rolls if 11ga
(9ga used in lower cushions, 11ga used in upper cushions)
$40 / 1-25ft roll
$60 / 2-25ft rolls
$80 / 3-25ft rolls
$100 / 4-25ft rolls
+shipping
email me: ben@classicseat.com
If you are redoing your seats, and have a handful of broken or badly rusted springs- these are exactly what you need.
I have these listed on ebay, but I'd rather sell directly to you guys and save the ebay hassle. Prices are slightly lower here as well.
** if you want longer or shorter lengths I can do that as well. let me know what you need.
#2
I have a 71 Cutlass Supreme with the front bench. The drivers side seat bottom is pretty soft, kind of like sitting in a hole! The rest of the seat is fine. How much do you think I would need for that side? I'm thinking 1 25 foot roll would be plenty but not sure since I haven't got it apart yet. Thanks!
#3
25 foot should be plenty unless you find yourself replacing every spring (doubtful it would need that).
Most often in bench seats when they go "soft" its the edge wire on the side where it attaches to the rear of the frame & outter side springs that are broken causing the lack of support.
The side springs are these funky "square" springs that are on the outter edge that break quite often- these can be replaced using the standard spring that I offer, just bend up to replicate the shape of the originals.
The edge wire is just 9ga steel rod, you can buy it at the HW store, then splice it into the original using spring edgewire clips.
Most often in bench seats when they go "soft" its the edge wire on the side where it attaches to the rear of the frame & outter side springs that are broken causing the lack of support.
The side springs are these funky "square" springs that are on the outter edge that break quite often- these can be replaced using the standard spring that I offer, just bend up to replicate the shape of the originals.
The edge wire is just 9ga steel rod, you can buy it at the HW store, then splice it into the original using spring edgewire clips.
Thread
Thread Starter
Forum
Replies
Last Post
RAMBOW
Parts For Sale
1
January 12th, 2016 07:29 AM
1976Cutlass
The Clubhouse
1
April 29th, 2015 05:40 PM
offer
General Discussion
3
July 29th, 2008 06:57 AM
many8
General Discussion
4
May 18th, 2008 06:26 PM