'71 - 2 TCS Switch/Vacuum Tree/Dist Vacuum Control Switch - Restored and nice
January 19th, 2018, 06:36 PM
#1
Registered User
Thread Starter
Join Date: May 2008
Location: Austin, Texas
Posts: 3,133
'71 - 2 TCS Switch/Vacuum Tree/Dist Vacuum Control Switch - Restored and nice
'71-2 Distributor Vacuum Control Switch. Nice clean part from a very low mileage car.
>Upper metal cover - cleaned to bare metal, epoxy primed and painted to simulate the original "yellow zinc" finish
>Black plastic "cover" at base of spade terminals - nice and clean. It did have a small piece cracked off the plastic but the piece wasn't missing so it's been re-attached (solidly with good adhesive...not just glued on the edge an barely attached). See second pic....the crack is not really visible or noticeable unless you're up close and looking for it.
>Cast alum "midsection" - beadblasted/cleaned, etc...very nice condition with a nice color and sheen to the aluminum. All letters, etc cast into this part are clear, readable and not worn off.
>Lower brass wrench flat area - 5-H-72 date code. Threads are perfect and no wrench damage to the brass...no rounding off, etc. Realize there are two wrench flats with a vertical line in them but this is from the production and not a wrench, etc.
$75 shipped - lower 48
Check or MO for payment.....no paypal
>Upper metal cover - cleaned to bare metal, epoxy primed and painted to simulate the original "yellow zinc" finish
>Black plastic "cover" at base of spade terminals - nice and clean. It did have a small piece cracked off the plastic but the piece wasn't missing so it's been re-attached (solidly with good adhesive...not just glued on the edge an barely attached). See second pic....the crack is not really visible or noticeable unless you're up close and looking for it.
>Cast alum "midsection" - beadblasted/cleaned, etc...very nice condition with a nice color and sheen to the aluminum. All letters, etc cast into this part are clear, readable and not worn off.
>Lower brass wrench flat area - 5-H-72 date code. Threads are perfect and no wrench damage to the brass...no rounding off, etc. Realize there are two wrench flats with a vertical line in them but this is from the production and not a wrench, etc.
$75 shipped - lower 48
Check or MO for payment.....no paypal
Thread
Thread Starter
Forum
Replies
Last Post
1969w3155
General Discussion
9
October 5th, 2015 10:24 PM
