'70 #6 heads, Edelbrock Performer 350 intake
#1
'70 #6 heads, Edelbrock Performer 350 intake
Heads, intake and valve covers SOLD. Carb spacer available!
1970 small block #6 heads, original, not worked over. Bought them 8 years ago from Steve Minore (StickW31) in CT if you know him. I've kept them stored inside (in my closet, actually) since for the day that I'd restore that '71 Cutlass Supreme of my dreams. Well, after 8 years, I've sorta given up on that. They include the original valves, springs and tappets. $300? OBO. Local pick up only unless shipping is worth my while. Denver, CO. Sold for $500 on eBay. Thanks for the interest!
Edelbrock Performer 350 Olds intake, #3711 (EGR-compatible), bought around the same time for either that project or doing a little something for the 307 in my '86. Never used. $150 OBO. Shipping and location same as above.
1973+ style valve covers in red. I think they're ugly, but if you like 'em, great. $20? Denver, CO
Airaid Poweraid carb spacer/riser. Pretty sure it's red anodized alumnimum. Never used. $100 OBO. This I'll actually ship. Priority Mail $6. Denver, CO
Pictures from my CL ad:
1970 small block #6 heads, original, not worked over. Bought them 8 years ago from Steve Minore (StickW31) in CT if you know him. I've kept them stored inside (in my closet, actually) since for the day that I'd restore that '71 Cutlass Supreme of my dreams. Well, after 8 years, I've sorta given up on that. They include the original valves, springs and tappets. $300? OBO. Local pick up only unless shipping is worth my while. Denver, CO. Sold for $500 on eBay. Thanks for the interest!
Edelbrock Performer 350 Olds intake, #3711 (EGR-compatible), bought around the same time for either that project or doing a little something for the 307 in my '86. Never used. $150 OBO. Shipping and location same as above.
1973+ style valve covers in red. I think they're ugly, but if you like 'em, great. $20? Denver, CO
Airaid Poweraid carb spacer/riser. Pretty sure it's red anodized alumnimum. Never used. $100 OBO. This I'll actually ship. Priority Mail $6. Denver, CO
Pictures from my CL ad:
Last edited by ncasantini; March 13th, 2013 at 02:06 PM. Reason: Fix tags.
#3
As far as the intake, the edelbrock rpm is more popular. I sold a performer for $100 about 6 months ago. Depends who's in the market at the time I'd say.
#4
Someone may jump on the intake for an easy 2bbl to 4bbl swap if local to you. It's $260 on Summit but includes shipping. Not sure why that spacer is so high compared to plain ones. Heads would need to find the right buyer.
#5
Thanks, guys! I'll give the TA boards a shot for the heads. Heads, of course, are always dependent upon finding the right buyer.
Yeah, I knew RPM was more popular when I bought the Performer. =T But that was the application I was going for. Oh well!
I have no idea why that spacer is so expensive, either. I just looked it up on Poweraid's site and knocked a bunch off my asking price for it. Maybe it's made from machined unobtainium?
Yeah, I knew RPM was more popular when I bought the Performer. =T But that was the application I was going for. Oh well!
I have no idea why that spacer is so expensive, either. I just looked it up on Poweraid's site and knocked a bunch off my asking price for it. Maybe it's made from machined unobtainium?
#7
I'm so sorry, Steve! I must've merged you and... Paul, right? In the 8 years it's been. I think you may have sent me his way, but I wanna say I bought these heads from you.
Edit: Original post modified. =)
Edit: Original post modified. =)
#10
Thanks, guys! I'll give the TA boards a shot for the heads. Heads, of course, are always dependent upon finding the right buyer.
Yeah, I knew RPM was more popular when I bought the Performer. =T But that was the application I was going for. Oh well!
I have no idea why that spacer is so expensive, either. I just looked it up on Poweraid's site and knocked a bunch off my asking price for it. Maybe it's made from machined unobtainium?
Yeah, I knew RPM was more popular when I bought the Performer. =T But that was the application I was going for. Oh well!
I have no idea why that spacer is so expensive, either. I just looked it up on Poweraid's site and knocked a bunch off my asking price for it. Maybe it's made from machined unobtainium?
#13
[img]
20130308_165534_zps31687989.jpg
20130308_165613_zps0ed0971d.jpg
20130308_165620_zpsfe55db7a.jpg
20130308_165630_zpsa0c9beda.jpg
20130308_165733_zpsbe19aa2b.jpg
20130308_165829_zps58edf2b0.jpg
20130308_165836_zps3e31efb1.jpg
20130308_165846_zpsb38c39fa.jpg
http://s1311.beta.photobucket.com/us...ntini/library/
20130308_165534_zps31687989.jpg
20130308_165613_zps0ed0971d.jpg
20130308_165620_zpsfe55db7a.jpg
20130308_165630_zpsa0c9beda.jpg
20130308_165733_zpsbe19aa2b.jpg
20130308_165829_zps58edf2b0.jpg
20130308_165836_zps3e31efb1.jpg
20130308_165846_zpsb38c39fa.jpg
http://s1311.beta.photobucket.com/us...ntini/library/
Thread
Thread Starter
Forum
Replies
Last Post
jensenracing77
Parts For Sale
3
February 16th, 2024 03:00 PM
arodenhiser
Small Blocks
6
November 30th, 2012 06:25 AM
scubastever
Small Blocks
1
August 27th, 2010 12:20 PM