1968 Full Sized Arm Rests
#1
1968 Full Sized Arm Rests
Sold to DeltaStew
I have a set of arm rests from a 1968 Delta Custom that I believe would fit several years of the full sized. The pads need recovered and the bases need cleaned but the plastic is sound, not crumbly. Price is $10 plus shipping. Check out the photos and let me know if you have any questions.
P1010159.jpg
P1010160-2.jpg
I have a set of arm rests from a 1968 Delta Custom that I believe would fit several years of the full sized. The pads need recovered and the bases need cleaned but the plastic is sound, not crumbly. Price is $10 plus shipping. Check out the photos and let me know if you have any questions.
P1010159.jpg
P1010160-2.jpg
#2
Do you still have these and both door panels? I asked you about them a few times, think you were going to check on shipping, never heard back. The door panels could be shipped in a radiator box I would think. Let me know, thanks, Philip
70815 Zip, btw
70815 Zip, btw
#3
Hello Phillip
Sorry, I'd lost track of your request. I was looking for a box and it will need a very large one, much larger than a radiator. The Delta Custom had crank windows then I have door panels from a 1968 Delta 88 with power windows. Other than that I think the door panels are pretty much the same. Which of the two did you want? Did I send you photos?
I believe I still have the power window parts if you wanted them too. John
Sorry, I'd lost track of your request. I was looking for a box and it will need a very large one, much larger than a radiator. The Delta Custom had crank windows then I have door panels from a 1968 Delta 88 with power windows. Other than that I think the door panels are pretty much the same. Which of the two did you want? Did I send you photos?
I believe I still have the power window parts if you wanted them too. John
#4
John, my car has power windows, if you could send me pics of both sets that would be great. The Custom panels have a simulated wood trim piece in them if I am correct? I don't remember exactly, as my parts car didn't have door panels. The pics would be great, and I would like to get the armrests, also. If you have a UPS or mail place nearby they can uasually pack items for you and ship them out.
#5
Phillip
I've uploaded pictures of the 1968 Delta 88, Delta Custom and 1967 Olds 98 door panels to my photobucket site. They've gotten damp since I last looked at them so I don't think the drivers side of the Delta Custom door panel is usable but trim parts only. The 1967 panels are the same. I think the 1968 Delta 88 panels could be cleaned and usable for a daily driver. I did find a box that will cost $27.85 to ship to your zip code. I would be willing to take $22.15 for the best ones for a total purchase plus shipping of $50. The arm rests would have to be shipping in a different box. Check out the photos and let me know what you think. John
http://s90.photobucket.com/albums/k2...20and%20Parts/
I've uploaded pictures of the 1968 Delta 88, Delta Custom and 1967 Olds 98 door panels to my photobucket site. They've gotten damp since I last looked at them so I don't think the drivers side of the Delta Custom door panel is usable but trim parts only. The 1967 panels are the same. I think the 1968 Delta 88 panels could be cleaned and usable for a daily driver. I did find a box that will cost $27.85 to ship to your zip code. I would be willing to take $22.15 for the best ones for a total purchase plus shipping of $50. The arm rests would have to be shipping in a different box. Check out the photos and let me know what you think. John
http://s90.photobucket.com/albums/k2...20and%20Parts/
#8
John, I'll take those as well even though I've got a convertible, I might could use the material. Is there anyway possible I could get the armrest base chrome backing pieces off of the Custom panels? I don't have any at all and could use them on the Delta panels. Let me know! Thanks a ton, Philip
Thread
Thread Starter
Forum
Replies
Last Post
matchek
Parts Wanted
6
March 10th, 2015 06:36 AM
2blu442
Parts For Sale
4
November 14th, 2012 10:05 PM