1965 Cutlass Parts
#1
1965 Cutlass Parts
As some of you probably read my post in the Cutlass forum I have recently acquired a lot of 65 Cutlass parts that I am selling so if you need something either email me or ask here and I will try and get back to you right away. I also have a 65 4 door car that has some usable parts also. In these box's there appears to be some of everything, 4 good dash pads, power windows, dashes,wiring harnesses, hubcaps, motors, switches, and everything else.
I will try and update with pics as I go through everything. I will either be shipping from Abbotsford BC or Sumas WA. (98295) depending what it is.
Maurice
Here are a couple pics of all the box's of parts I have
M%20007_zpsocz9yg7y.jpg
M%20006_zpsmqodcxis.jpg
I will try and update with pics as I go through everything. I will either be shipping from Abbotsford BC or Sumas WA. (98295) depending what it is.
Maurice
Here are a couple pics of all the box's of parts I have
M%20007_zpsocz9yg7y.jpg
M%20006_zpsmqodcxis.jpg
#5
Here are some pics $375 US including shipping US or Canada (dash pad only) SOLD
M%20008_zpszmwfsudq.jpg
M%20010_zpsnwapzp1x.jpg
M%20012_zpst7gvi8u0.jpg
M%20011_zps2iic6fis.jpg
M%20009_zpsjdfs0yhj.jpg
M%20008_zpszmwfsudq.jpg
M%20010_zpsnwapzp1x.jpg
M%20012_zpst7gvi8u0.jpg
M%20011_zps2iic6fis.jpg
M%20009_zpsjdfs0yhj.jpg
Last edited by mauricer; March 20th, 2015 at 03:34 PM. Reason: brown dash pad sold
#8
no new sheet metal, only found 1 tail panel so far and it already sold, trunk floor in my parts car is spoken for subject to him viewing it. rear deck panel looks ok cant see any holes in it just surface rust around the window moulding, i can send some pics if you want
#11
A few goodies
You mentioned 64-65 parts - You don't happen to have a set of 64 poverty caps do you? I'd be interested in a nice set of 65's too. I'm getting a little OCD with that - I already have 3 sets...
Also if you had a decent core support - not perfect - I'd have a look at it.
You are just a quick trip up the highway!
Also if you had a decent core support - not perfect - I'd have a look at it.
You are just a quick trip up the highway!
#12
is that filler panel new or on a parts car? honest dave has a used one rt up the road. just trying to avoid drilling all those spot welds twice
#15
The texture is different between the two years
Also on 64 (some ) seem to have a spilt over the steering column not sure why can't seem to put a factory or early/ late build date with it or floor shift verses column shift
Any ways just get glove box door with it so that the grains match is my advise
#16
#22
Could you send a pic or two to paulyperl@gmail.com just to see how rough thanks
#24
Shawn... I definitely have a set but not sure how good until I remove them from my parts car, I would assume they will have nuts broken off but looking at them they don't appear rusted out. Hopefully I will have time in the next few days to strip the front end.
Maurice
Maurice
#25
Dash pad
Interested in coming by to check out the dash pad. Also have boxes of 65 parts I need to do some thing with soon as am building a new garage etc and need to move some parts. Live in Vancouver BC. Could drop by to see the dash pad. Also need rear eel rice windows for my convertible thanks. Bob
#28
Sorry, I actually need the RIGHT side (pass.) eyebrow molding. Lord, old age couldn't come at a worse time. While you're looking, see if you have the right side and need both sides f85 fender emblems. Thanks
Last edited by pappy; December 28th, 2015 at 05:56 PM.
#31