Mimicking Phosphate coating with paint process - ClassicOldsmobile.com

Go Back  ClassicOldsmobile.com > Repair & Restoration > Body & Paint > Paint
Mimicking Phosphate coating with paint process >

Mimicking Phosphate coating with paint process

Mimicking Phosphate coating with paint process

Old February 7th, 2019, 04:03 PM
  #1  
RWB
Registered User
Thread Starter
 
RWB's Avatar
 
Join Date: Dec 2007
Location: NW Suburbs - Chicago
Posts: 8
Mimicking Phosphate coating with paint process



This is how I created a faux phosphate finish on my hood latch.
This finish is typified by the OEM coating on GM hood hinges that has a somewhat crystalline metallic element to it and is dark to medium dark gray in color.
This method produced acceptable results for me, but may not be suitable for an all-out restoration.
[Vehicle: '73-'77 Cutlass]
One of the pictures shows how the part compares to underhood surface painted with straight semi-gloss black lacquer Dupli-Color #DAL 1608
~~~~~~~~~~
There may be a commercial kit or paint for this, and perhaps someone else has figured this out, but.... I found a way to somewhat replicate the phosphate coating on some underhood parts, like the OEM coating on GM hinges, which I believe to be Zinc phosphate.

I was able to use paints I already had on hand.
  • Assuming a cleaned/stripped and dry part;
  • Prime with self etching primer
  • Paint with Semi-gloss black lacquer
  • Apply thin somewhat sparse coating of 'Graphite' (colored) wheel paint, sprayed from a distance.

(normal painting procedures apply, No. of coats, time between coats etc.)
(do not force dry, with high heat source, parts with springs still attached)

I didn't have any, but a final coat of semi-gloss clear lacquer might not be a bad idea. One would have to experiment with that to see if it helps or hurts.

The paint I used (all Dupli-Color products)

DAP 1690 Self Etching Primer (lacquer)
UPC 26916-94690

DAL 1608 Semi Gloss Black (lacquer)
26916-93608

HWP 102 Graphite [ A wheel paint ] (presumeably lacquer (?))
26916-00102
RWB is offline  
Old February 7th, 2019, 06:33 PM
  #2  
Registered User
 
Join Date: Mar 2008
Posts: 3,440
Eastwood spray gray and zinc phosphate rattle can paints are worth trying also.
Run to Rund is offline  
Old February 7th, 2019, 08:01 PM
  #3  
Registered User
 
Eddie Hansen's Avatar
 
Join Date: Jan 2008
Location: South River, New Jersey
Posts: 2,787
nice Job!!
Eddie Hansen is offline  
Old February 8th, 2019, 06:08 AM
  #4  
Old(s) Fart
 
joe_padavano's Avatar
 
Join Date: Mar 2007
Location: Northern VA
Posts: 31,457
That looks nice. The only thing I would suggest is that for a closer-to-OEM finish I'd use a dead flat clear. Real phosphate coating is completely flat with a "rough" finish. The semi gloss is probably more durable but looks to shiny.
joe_padavano is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
70Post
Parts For Sale
0
January 19th, 2018 06:48 PM
RandyS
Paint
4
July 19th, 2015 12:50 PM
jensenracing77
General Discussion
24
May 18th, 2013 10:17 AM
branchman88
Cutlass
13
October 12th, 2008 07:35 PM


Thread Tools
Search this Thread
Quick Reply: Mimicking Phosphate coating with paint process


Archive Advertising Cookie Policy Privacy Statement Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.