Cutlass build update
July 22nd, 2012, 12:09 PM
#3
Registered User
Thread Starter
Join Date: Jan 2010
Posts: 69
Thank you. I will keep updating pictures as I go, I have not had a chance to lay paint down yet. My Wife's Suburban needed brakes and a radiator so that took priority over the Cutlass, it is a 2000 2500 so it is no fun to work on.
Last edited by ATrain1; July 22nd, 2012 at 12:14 PM.
August 9th, 2012, 02:38 AM
#4
Registered User
Join Date: May 2009
Location: USA
Posts: 2,200
I'm all for modding......if the mod's are effective.
I'd start over with the air cleaner(s) If you bought that as a kit, I'd return it.
To me, it looks like you/they attempted a dual cold air intake but ran out of pipe.
Or whomever designed it, didn't do a very good job.
It's too short, and not going to net you the cold air it looks like you were
shooting for especially hanging right over the headers.
Go for something like the older Hurst Olds used instead. FAR MORE effective.
I'd start over with the air cleaner(s) If you bought that as a kit, I'd return it.
To me, it looks like you/they attempted a dual cold air intake but ran out of pipe.
Or whomever designed it, didn't do a very good job.
It's too short, and not going to net you the cold air it looks like you were
shooting for especially hanging right over the headers.
Go for something like the older Hurst Olds used instead. FAR MORE effective.
Last edited by Aceshigh; August 9th, 2012 at 02:45 AM.
August 9th, 2012, 08:02 AM
#5
Registered User
Thread Starter
Join Date: Jan 2010
Posts: 69
I'm all for modding......if the mod's are effective.
I'd start over with the air cleaner(s) If you bought that as a kit, I'd return it.
To me, it looks like you/they attempted a dual cold air intake but ran out of pipe.
Or whomever designed it, didn't do a very good job.
It's too short, and not going to net you the cold air it looks like you were
shooting for especially hanging right over the headers.
Go for something like the older Hurst Olds used instead. FAR MORE effective.
I'd start over with the air cleaner(s) If you bought that as a kit, I'd return it.
To me, it looks like you/they attempted a dual cold air intake but ran out of pipe.
Or whomever designed it, didn't do a very good job.
It's too short, and not going to net you the cold air it looks like you were
shooting for especially hanging right over the headers.
Go for something like the older Hurst Olds used instead. FAR MORE effective.
Thread
Thread Starter
Forum
Replies
Last Post
wildwillie1981
Racing and High Performance
5
April 24th, 2013 04:19 PM
