1970 olds 98 455 rear end posi
#2
Check with Brian: thetrickfamily@yahoo.com
He is a well known Olds guy, whose specialty is Olds rear ends.
Norm
He is a well known Olds guy, whose specialty is Olds rear ends.
Norm
#3
You will have to go to an after-market housing such as a corporate 12-bolt GM or a Ford 9". After-market gears are non-existant for 1965-1970 Olds. The best u will find, if u r lucky, is a 3:08 posi. I am into the "big" Olds and I have looked for years for better gears, the best I have found is 3:08. I have several 3:08 Posi, most in my cars. Good luck, Ken
#5
Richmond Gears makes aftermarket Rings and Pins for the O-type posi unit.
http://www.richmondgear.com/01gm.html
They only fit for the #671 (3.08's 3.23's) posi carrier though.
This information is from Brian Trick (as mentioned above). I've mentioned this before. If your going the posi route, I highly recommend for anyone to talk with him. He is awesome.
By the way, Brian can make those richmond gears fit #672, #588, and #673 posi carriers.
http://www.richmondgear.com/01gm.html
They only fit for the #671 (3.08's 3.23's) posi carrier though.
This information is from Brian Trick (as mentioned above). I've mentioned this before. If your going the posi route, I highly recommend for anyone to talk with him. He is awesome.
By the way, Brian can make those richmond gears fit #672, #588, and #673 posi carriers.
Last edited by Edveen; February 12th, 2008 at 02:02 PM.
Thread
Thread Starter
Forum
Replies
Last Post
350TurBRO
Transmission and Driveline
6
September 12th, 2014 11:52 AM
esisson
General Discussion
15
February 7th, 2011 11:34 PM