Howard blacker

well i gues i didnt do the introducing thing right so here goes bought a 57 88 body is great came with every thing all crome etc floors are all rotern from trunk to fire wall so i bought tools and sheet metal and went into it ordered body frame mounts from fusic i had to make all inner rockers and re make all floor suports never done this before but made templates and away i went its looking prety good right now engine is original and is away at machine shop i stript it down first and washed all parts tranny is original its coming back from repair shop on monday if anny body wants pics ect i can send to them i have lots its a lot of fun and hard work because its a canadian car i wrote to gm and got its histoy pretty awsome thanks howietheb@gmail.com

oldcutlass

Welcome to the site. Everyone is going to ask for pic's, so you might as well post some. Is there anything special in the history of the car?

jaunty75

They're going to ask for punctuation, too!

Howard blacker

i will punctuate,thanks. i am not sure how to post pics i have lots, i did it once cant remember how i did it.read stickys post re pics but could not follow at 65 brain works but slow any help appreciated.

Yellowstatue

Hi Howard; Someone on the east coast was selling reproduction floor pans on eBay last year. Have a look there and see what you come up with....and Welcome! Statue.

citcapp

Always nice to see another 57 on the site. Yes pictures are a must

Christaylorsr

Project 57 olds 88 on board...

Tedd Thompson

This is a post from 2014, doubtful that any info will bring back a dead post from that far back...... Tedd

Christaylorsr

That's true/ funny at the same time!!!😂