servexcell

Is the parts available to restore the linkages. has anyone done so?

Thanks Bruce

Charlie Jones

Here's one ;
http://www.wiperman.com/

oldspackrat

I have several good 1968-72 wiper transmissions here in Indy.
Call me?
Scott
317-727-7041

oddball

You can mostly disassemble, clean and lube the parts. Some of the joints can't be disassembled, but you can inject lube. If a part is completely worn out then you may be best off buying a better original unit.

servexcell

It seems like the joints are a ball and socket type,They are bolted and i think they have copper sleeves. Does anyone know were to get parts
thanks Bruce

Charlie Jones

Bruce , I can only assume that we are talking about a '68 Cutlass or 442 ?
This wiper linkage was crimped together at the joints , and was serviced only as a complete assembly . There was a left and right side . Some models had recessed park {disappearing} wipers. The left side had a different assembly.
Everything from the round part that the wiper arm attaches to , down to the wiper motor .

I found the following;

I found the part numbers here;
http://wildaboutcarsonline.com/membe...sher_Parts.pdf

4918758 for RH side
4918620 for LH side (without recessed park)

Then I took those numbers to GM partswiki ;
http://www.gmpartswiki.com/getpage?pageid=50762
and found out that that those same parts also fit '68 thru 72 Chevelle .

I googled '68 Chevelle wiper linkage and found this ;
http://www.jegs.com/i/Performance-Tr...yABEgKasPD_BwE

oldspackrat

I have several complete wiper transmission assemblies, $35.00 plus shipping.

servexcell

Sorry for the belated response guys. Reaaly appreciate the help. I think you can maybe pirchase bushings for the linkage.

Bruce