External VR to Internal VR upgrade!
#2
Get a 12SI. They can be had in stock form up to 94 amps and will bolt in just fine.
Like this one...
http://www.oreillyauto.com/site/c/de...1468&ppt=C0330
Like this one...
http://www.oreillyauto.com/site/c/de...1468&ppt=C0330
Last edited by svnt442; April 19th, 2017 at 08:02 PM.
#3
The CS130 will. I bought one that is shown as a stock replacement for my 1988 Oldsmobile Cutlass Supreme Classic, 105 amps. Good luck finding a true 12SI replacement. Most are 10SI chrome case alternators which get very hot and don't last. I also see 12SI fans on 10SI cases and vice versa. The aftermarket should have copied the 12SI, the better fan and more open case was done for a reason, improved cooling with higher amperage.
#4
This is what I put on my 71 98:
http://www.jegs.com/p/JEGS-Performan...50748/10002/-1
Surprisingly, the OE alternator posted above is listed for the same price as the one at Jegs. I'm happy with it so far.
http://www.jegs.com/p/JEGS-Performan...50748/10002/-1
Surprisingly, the OE alternator posted above is listed for the same price as the one at Jegs. I'm happy with it so far.
#5
Thanks guys! I already upgraded the charge wire to 6 gauge. Should I put in a maxi fuse? If so where should I put it and how many amp fuse? I'm looking at a 140 amp alternator I have dual 18" electric fans and electric fuel pump.
Thread
Thread Starter
Forum
Replies
Last Post
danlonchar
Big Blocks
5
October 2nd, 2010 12:34 PM