oldsmobilty

I have a 8.5, 10 bolt 28 spline differential. I had the bearings and seals replaced with a tapered bearing. My problem is, the axle has some play in it and when I move it in and out. Could there be something missing or how do I correct it? Should I go back to the original style bearing?

Fun71

What tapered bearing did you use? I thought the Timken Set9 was the bearing for that application.

oldsmobilty

I'm not 100% sure it came in a Ratech "ring and pinion" install kit. That probably explains it. Thanks

monzaz

Not so much the bearing as it is the seal deal.
Set9
712146 seal <<<<<
Both Timkin

Seal must be at least .490 (almost 1/2" thick)
If the seal is .460 thick that is where your problem is going to be.

If the seal is black and gold it will probably be the WRONG seal. it is most likely a 2146 in a 712146 box.

Jim
J D Race

oldsmobilty

Thanks Monzaz, that is exactly what I found out. I found those exact part numbers at a local store