Sourcing U-Joint Strap Help
#1
Sourcing U-Joint Strap Help
I'm trying to find a replacement U-joint strap for my 72 cutlass. 350/350 ci combo.
I thought the Dorman part here would fit
http://www.autozone.com/drivetrain/u...6_485369_7790/
But the U is too tall.
I know there was a thread a while back where someone found them, but I can't find it in my search.
Where have you guys gotten them?
I thought the Dorman part here would fit
http://www.autozone.com/drivetrain/u...6_485369_7790/
But the U is too tall.
I know there was a thread a while back where someone found them, but I can't find it in my search.
Where have you guys gotten them?
#4
#5
Call Denny at Dennys Driveshafts. He'll have the good bolts too.
http://www.dennysdriveshaft.com/how_to_measure.html
http://www.dennysdriveshaft.com/how_to_measure.html
#7
Part number for dorman 10 bolt 8.5 bolt and strap kit.
Here is what you need if you want dorman -
Part Number: 81001
Your u - joint cap is 1.125
The other one is for a 1310 1.063 cap size. Taller and skinner. Bolts are too short also... That strap kit is more for a dana rear with a 1310 joint.
Jim
J D Race
Part Number: 81001
Your u - joint cap is 1.125
The other one is for a 1310 1.063 cap size. Taller and skinner. Bolts are too short also... That strap kit is more for a dana rear with a 1310 joint.
Jim
J D Race
Last edited by monzaz; September 29th, 2016 at 08:02 PM.
#8
Have you used the 81001? I held one up next to the one I removed from my car and it seemed to be bigger than the one on the car.
Last edited by jpc647; October 3rd, 2016 at 05:03 AM.
#9
That AC Delco part number seems to be right! Got them in the mail today. They seem to match right up to the traced parts. Haven't installed them(hopefully tomorrow), but thanks for the recommendation OddBall!
Thread
Thread Starter
Forum
Replies
Last Post