70 W31 Hardtop Interior Details

Thread Tools
 
Search this Thread
 
Old October 26th, 2014, 06:02 PM
  #1  
Registered User
Thread Starter
 
briane's Avatar
 
Join Date: Jan 2012
Posts: 735
70 W31 Hardtop Interior Details

Working on a '70 W31 hardtop-Holiday Coupe and I have a couple of questions. Did any of the dashes have the full width wood applique (in addition to that around the gauges)? I've seen cars with and without it (mostly without).


Did the door panels have the chrome trim plates under the arm rests? Again I've seen both, mostly without.


Thanks.
briane is online now  
Old October 26th, 2014, 07:31 PM
  #2  
Registered User
 
oldsmobiledave's Avatar
 
Join Date: May 2011
Location: Delta BC Canada
Posts: 3,688
Fyi

No wood applique on dash & no chrome plates under arm rests on my 1970 W-31 Cutlass hardtop
oldsmobiledave is offline  
Old October 26th, 2014, 08:54 PM
  #3  
Registered User
 
Indy Guy's Avatar
 
Join Date: Oct 2009
Posts: 224
Neither on my F-85 W31
Indy Guy is offline  
Old October 26th, 2014, 11:03 PM
  #4  
Registered User
 
johnnyjaws's Avatar
 
Join Date: Feb 2014
Posts: 401
i have then on the cluster gauge and that it but i would like it all the way across stuff is $$$$$
johnnyjaws is offline  
Old October 27th, 2014, 05:47 AM
  #5  
Registered User
 
Bunser's Avatar
 
Join Date: Feb 2008
Posts: 665
Originally, my car was the instrument pod only, but thanks to a warranty replaced glove box door (with the wood applique), I then purchased the remaining middle piece.
Bunser is offline  
Old October 27th, 2014, 06:55 PM
  #6  
Registered User
Thread Starter
 
briane's Avatar
 
Join Date: Jan 2012
Posts: 735
I did a little homework and figured this out:


Regular Production Option BC1 Wood Grain Instrument Panel, available on the Cutlass Holiday and Sport Coupe but not on the F85, was for the full dash and glovebox wood grain. As JoesW31 noted, it also included the dash pad chrome piping.


Regular Production Option D15 Deluxe Arm Rests, available on the Cutlass Holiday and Sport Coupe but not the F85, supplied by the chrome backing plates. Apparently the stainless moldings inset into the arm rest bases were standard.


My car has both of these options, as well as AK1 Deluxe Seat Belts. I don't know if these were factory installed, an earlier owner may have added them.
briane is online now  
Old January 8th, 2018, 12:32 PM
  #7  
Escape From The Ordinary
 
WTHIRTY1's Avatar
 
Join Date: Oct 2014
Posts: 1,873
Good topic. So, if you checked BC1 on the order for Wood Grain Instrument Panel, you'd receive the wood grain across the entire dash (radio area, glovebox). Can I assume that if you did not get that option, you'd still get the wood grain on the instrument panel piece alone?

As for the seat belts, what's the difference between the standard rear shoulder belts and the deluxe rear shoulder belts? Should belts in the front would be AS1 Std. Frt. Shoulder Belts, correct?
WTHIRTY1 is offline  
Old January 8th, 2018, 07:05 PM
  #8  
Registered User
 
70Post's Avatar
 
Join Date: May 2008
Location: Austin, Texas
Posts: 3,128
Gauge bezel got the woodgrain insert no matter what. That whole plastic part of the bezel is vacuum-metallized-"chrome" and they didn't make a separate plastic gauge bezel in a "plain" plastic such as black, etc.

Can't help on the belts....someone else will chime in.
70Post is online now  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
84oldsDelta88
Cutlass
7
March 12th, 2012 07:18 AM
DoubleU30
General Discussion
4
October 2nd, 2011 06:14 PM
sbFALL63
Paint
1
August 7th, 2010 04:45 PM
kruss77
Eighty-Eight
2
August 21st, 2009 06:27 PM
dharlett
Chassis/Body/Frame
4
October 8th, 2008 06:08 PM



Quick Reply: 70 W31 Hardtop Interior Details



All times are GMT -7. The time now is 07:56 PM.