gordo

I'm replacing the upper and lower control arm bushings along with the coil springs. After I disassembled I realized that the upper and lower bump stops were trashed. I can't find the uppers online. I think I can use a couple new lower arm stops I used on an 2nd gen T/A for this app as well. Links anyone?

oldcutlass

Opgi, Fusicks, Yearone, SS396, etc... should carry them.

And ebay:
http://www.ebay.com/itm/64-74-Front-...cd1491&vxp=mtr

gordo

I found the lowers just a few minutes ago on Fleabay and Amazon. Thanks for the reply and the sites. But I'm having an issue with locating the uppers.

The stop on the right in this image is the type I require.

oldcutlass

The upper ones can be had at the same places also.

Ebay:
http://www.ebay.com/itm/64-74-Front-...2f3e7f&vxp=mtr

gordo

What's funny is that I saw those exact parts elsewhere and I said to myself, 'Those CAN'T be the right parts.' I was thinking they were MUCH flatter. LOL. Kinda like these http://www.energysuspensionparts.com...sp?prod=9.9102 Live and learn. Thanks so much oldcutlass, I really appreciate you taking your time to help. I'll have more questions, probably weekly

oldcutlass

No problem, I've already been where you are many times, you may want to do your lower control arms and bushings while your there and have it apart. Good luck with your project.

gordo

I am. I'm having them media blasted and powder coated. Took 'em down today and I was quoted $125 for degreasing, blasting and powder coating. I'm having the upper and lower control arms, the brake dust shield, the spindle and drums done. It's not a show car but I wanted to get an idea of how it would look powder coated. If I like it, I might do the frame.

oldcutlass

Sounds like a plan, perhaps start a project thread and post some pics.

gordo

Will do and thanks again.