66-72 Cutlass/442 4 speed
#1
Registered User
Thread Starter
Join Date: Jun 2009
Location: Creekside, PA (near Indiana, PA)
Posts: 395
66-72 Cutlass/442 4 speed
Willing to pay up to $15k maybe more for the right car. As rust free as possible, driver condition or slightly nicer. I want a clutch. W cars and Hurst (I know auto) considered as well. I really would prefer within 400 miles of 15732, but try me you never know.
#5
Registered User
Thread Starter
Join Date: Jun 2009
Location: Creekside, PA (near Indiana, PA)
Posts: 395
Retro, it fell through on my end, I needed financing for part of the price and my bank made it impossible. I see that it is back on CL as well, unfortunately he still doesn't have any updated pictures with the front end all together.
#7
Registered User
Thread Starter
Join Date: Jun 2009
Location: Creekside, PA (near Indiana, PA)
Posts: 395
I had planned on keeping the '69, but just got burnt out on it. I should have the new ride in about 2 weeks, look for an updated signature, avatar, and new thread. Here's another hint it's a 455 and a 4 speed.
#9
Registered User
Thread Starter
Join Date: Jun 2009
Location: Creekside, PA (near Indiana, PA)
Posts: 395
Well I'm back in the market for the same car. Will also consider G body H/O, 442. Really want a Big block and a 4 speed, but will consider a small block and 4 speed as well. Still at $15k driver condition preferred. Within 400 miles of 15732, but will consider all cars.
#11
If you decide to build one let me know. I may be able to help with some of it. Iv'e been holding on to this transmission for a while.
I rebuilt the engine it came from. It was a 69 F block. The car itself was a 72 442 that had an interior fire.
I rebuilt the engine it came from. It was a 69 F block. The car itself was a 72 442 that had an interior fire.
#12
Registered User
Thread Starter
Join Date: Jun 2009
Location: Creekside, PA (near Indiana, PA)
Posts: 395
Ok, consider me confused are you selling the engine as well or just the transmission? I have a line on a '69 400 came out of a '69 442, will need rebuilt most likely. Now just need the car. Also how much for that transmission? Do you have the bellhousing, pedals...?
#13
Hey Jon. I would sell the transmission, bell housing and flywheel along with the shifter linkages as you see it with a new Hurst T-handle.
I think the bell housing may have some damage, I would have to check. I'm keeping the engine.
I think the bell housing may have some damage, I would have to check. I'm keeping the engine.
Thread
Thread Starter
Forum
Replies
Last Post
Big Mikey
General Discussion
21
March 27th, 2013 06:51 AM