1967 Olds 442, 2 door hard top, 4 speed project for sale
June 3rd, 2013, 08:51 AM
#1
Registered User
Thread Starter
Join Date: Jun 2013
Posts: 7
1967 Olds 442, 2 door hard top, 4 speed project for sale
Cowl I.D.
04B General motors
ST 67-33817 LAN21632 Body
TR 975-B R-R Paint
2LG
5V
Red on red, factory buckets, original 442, 4 speed built in Lansing
Original motor was replaced at one time with a 350 rocket. Still has the Muncie 4 speed tranny with a Hurst, short throw shifter.
I started a complete frame off, and the car is totally disassembled but complete. Needs quarter panels, trunk floors, lower front fender skins, and door skins. The rest of the body is solid. Original 442 louvered hood in excellent shape. 442 chassis also complete, boxed trailing arms, rear sway bar, posi-trac, etc. Interior needs to be completely re-done exept for dash pad which is nice.
I would like to see the car go to a good home and get restored, but I am also open to selling off the important parts, if someone wanted to buy the majority of them. If nothing else, this might be a great opportunity for someone to get their hands on 442 ID tags and vin codes with a clear title.
I wish I could follow through with this car but I have too many projects, not enough room, and too little money.....something has to go.
Looking for the best offer. I am in Indiana. Anyone interested can contact me at rickg@onlyinternet.net
04B General motors
ST 67-33817 LAN21632 Body
TR 975-B R-R Paint
2LG
5V
Red on red, factory buckets, original 442, 4 speed built in Lansing
Original motor was replaced at one time with a 350 rocket. Still has the Muncie 4 speed tranny with a Hurst, short throw shifter.
I started a complete frame off, and the car is totally disassembled but complete. Needs quarter panels, trunk floors, lower front fender skins, and door skins. The rest of the body is solid. Original 442 louvered hood in excellent shape. 442 chassis also complete, boxed trailing arms, rear sway bar, posi-trac, etc. Interior needs to be completely re-done exept for dash pad which is nice.
I would like to see the car go to a good home and get restored, but I am also open to selling off the important parts, if someone wanted to buy the majority of them. If nothing else, this might be a great opportunity for someone to get their hands on 442 ID tags and vin codes with a clear title.
I wish I could follow through with this car but I have too many projects, not enough room, and too little money.....something has to go.
Looking for the best offer. I am in Indiana. Anyone interested can contact me at rickg@onlyinternet.net
June 11th, 2013, 09:50 PM
#4
Registered User
Thread Starter
Join Date: Jun 2013
Posts: 7
A few photos
DSCF0442.jpg
DSCF0446.jpg
DSCF0444.jpg
DSCF0453.jpg
DSCF0450.jpg
This is a complete car, stock louvered hood and all. It has been torn down completely to start on the sheet metal and I got too busy with other things. I am happy to answer any questions. If at all interested make a reasonable offer.
DSCF0446.jpg
DSCF0444.jpg
DSCF0453.jpg
DSCF0450.jpg
This is a complete car, stock louvered hood and all. It has been torn down completely to start on the sheet metal and I got too busy with other things. I am happy to answer any questions. If at all interested make a reasonable offer.
June 11th, 2013, 09:55 PM
#5
Registered User
Thread Starter
Join Date: Jun 2013
Posts: 7
June 19th, 2013, 08:19 PM
#6
Registered User
Thread Starter
Join Date: Jun 2013
Posts: 7
Sorry all, the car sold today. Just when interest was heating up.
Here is what it looked like after I got it together to transport easier for the buyer.
DSCF0510.jpg
DSCF0511.jpg
DSCF0510.jpg
DSCF0511.jpg
Thread
Thread Starter
Forum
Replies
Last Post
Paul Freeman
Parts Wanted
10
March 17th, 2013 05:25 PM
cjprm
Interior/Upholstery
1
May 19th, 2011 09:17 AM
gearheads78
Cars For Sale
0
April 1st, 2010 06:33 PM
