Cutlassefi Amazing guy
#1
Cutlassefi Amazing guy
I recently bought a roller cam, lifters, pushrods and carb from Cutlassefi....
He first asked what i wanted the car to do, then we went over what parts were in my motor. He came up with a plan of parts, and let me tell you... he held my hand all the way through the installation and tuning. I called him way more than I should have and he answered every question I had.
Most importantly, his help allowed me to tackle and complete a project and learn a ton along the way that I would not have been able to do otherwise.
If you had any doubts about buying stuff from him you should let it go, he sent tracking numbers along the way and while my learning curve kept things from going smoothly, he was patient and helpful the whole way.
He first asked what i wanted the car to do, then we went over what parts were in my motor. He came up with a plan of parts, and let me tell you... he held my hand all the way through the installation and tuning. I called him way more than I should have and he answered every question I had.
Most importantly, his help allowed me to tackle and complete a project and learn a ton along the way that I would not have been able to do otherwise.
If you had any doubts about buying stuff from him you should let it go, he sent tracking numbers along the way and while my learning curve kept things from going smoothly, he was patient and helpful the whole way.
#2
Wow! It's like you were writing about MY experiences with Mark.
His reputation here on CO was the reason I went with Mark for an engine upgrade I was contemplating. It was initially going to be an upgrade from iron to aluminum heads, but over the course of back and forth discussions, I ended up buying a roller cam, lifters, rockers & push rods as well. I really like the idea of having a camshaft custom ground specifically for my car/drivetrain. He also suggested I go with a Edelbrock Performer intake (which I found used in excellent condition). I topped everything off with a rebuilt Holley 850 which I had sitting on the shelf. Once I degree the cam, I'll get her painted and reinstalled ASAP.
The point of this post was not to outline my project, but to share how Mark's vast experience and knowledge of Oldsmobile engines allowed me to make improvements to my engine that I would have never considered otherwise. As you already wrote, Mark is extremely patient and more than willing to share his wisdom. I really, sincerely believe that he was far more concerned about helping me make wise decisions, than he was about selling me parts. It was so refreshing to be dealing with someone I actually felt had my best interests at heart!
In my opinion, Mark is not only knows his stuff when it comes to Oldsmobile engines, but he is also a 100% trustworthy gentleman with whom I would do business with again in a heartbeat!
Thanks, Mark, for all your guidance and patience!
His reputation here on CO was the reason I went with Mark for an engine upgrade I was contemplating. It was initially going to be an upgrade from iron to aluminum heads, but over the course of back and forth discussions, I ended up buying a roller cam, lifters, rockers & push rods as well. I really like the idea of having a camshaft custom ground specifically for my car/drivetrain. He also suggested I go with a Edelbrock Performer intake (which I found used in excellent condition). I topped everything off with a rebuilt Holley 850 which I had sitting on the shelf. Once I degree the cam, I'll get her painted and reinstalled ASAP.
The point of this post was not to outline my project, but to share how Mark's vast experience and knowledge of Oldsmobile engines allowed me to make improvements to my engine that I would have never considered otherwise. As you already wrote, Mark is extremely patient and more than willing to share his wisdom. I really, sincerely believe that he was far more concerned about helping me make wise decisions, than he was about selling me parts. It was so refreshing to be dealing with someone I actually felt had my best interests at heart!
In my opinion, Mark is not only knows his stuff when it comes to Oldsmobile engines, but he is also a 100% trustworthy gentleman with whom I would do business with again in a heartbeat!
Thanks, Mark, for all your guidance and patience!
#9
#12
How can I get in touch with such an amazing guy
Well as the title states, I’m trying to get in touch with Cutlassefi. I want to purchase some parts but I couldn’t find a phone number, website or email address. Let me know if you’re still out there
Thread
Thread Starter
Forum
Replies
Last Post
sx455raidercelticfan
Buyer & Seller Feedback
4
February 10th, 2017 02:57 PM
1968CutlassSupreme
Small Blocks
9
February 8th, 2015 07:49 AM
Aceshigh
General Discussion
48
May 21st, 2011 09:28 AM